Crystic Pipe Relining Resin PD10154I - 6122

Identification & Functionality

Chemical Family: Magnesium & Magnesium Compounds,
Orthophthalics,
Unsaturated Polyester (UPE)
Polymer Name: Thermoset Polyester
Composite Materials Functions: Resins, Binders & Matrix Materials,
Surface Finish
Technologies: Composite Materials
Product Families: Composite Materials — Polymers & Resins
Thermoset Resins
Composite Materials — Surface Finishes
Gelcoats & Topcoats

Features & Benefits

Materials Features: Good Mechanical Properties,
Good UV Protection,
High Elongation,
High Heat Deflection Temperature,
High Impact Resistance,
High Molecular Weight,
Water Resistant
Features and Benefits: High HDT

High Molecular Weight

High elongation

Long term experience

Excellent mechanical properties

Excellent resistance to water ingress

Excellent impact resistance

Safety in use

Applications & Uses

Markets: Industrial
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Composites End Use: Liners,
Pipes,
Tanks
Recommended Applications: CRYSTIC PD 10154I has been specially developed for UV curing systems and relining pipe repair industry.
Formulation Guidelines: This Resin contains a photo-initiator and can be cured under UV light or LED exposure. For UV curing applications, a UV lamp of 400W Energy is recommended and the optimum wave length absorption is 370 nm.

Properties

Typical Liquid Resin Properties
Cured Properties
Note: Test according to BS 2782 :1980
1MPa = 1MN/m² = 1N/mm² = 10,2 kgf/cm²
* cured 24 h at 20°C then 3 h à 80°C except for the HDT where the schedule was 24 h at 20°C then 5 h at 80°C then 3h at 100°C.

	Value	Units	Test Method / Conditions
Viscosity (at 25°C, Rheomat 37,35s⁻¹)	4 - 6	dPa.s	-
Specific Gravity	1.1	-	-
Acid Index	10 - 15	mg KOH/g	-
Solid Content (1H, at 150°C)	53 - 57	%	-
Stability (with storage recommendations)	9	Months	-

	Value	Units	Test Method / Conditions
Barcol Hardness (GYZJ 934-1)*	44	-	-
Heat Deflection Temperature (under load 1.8 MPa)*	104	°C	-
Water Absorption (24h, at 23°C)*	15	mg	-
Specific Gravity (at 20°C)*	1.16	-	-
Elongation (at break)*	2.1	%	-
Tensile Strength*	60	MPa	-
Tensile Modulus*	3700	MPa	-
Flexural Strength*	130	MPa	-
Flexural Modulus*	3600	MPa	-

Regulatory & Compliance

Quality Standards: DIN 16946-2,
DIN 18820
Approvals: CRYSTIC PD 10154I is type 1140 according to German standard DIN 16946 Teil 2 and group 3 according to DIN 18820 Teil 1.

Technical Details & Test Data

Additives: Since certain pigments, fillers or extra styrene may affect properties of CRYSTIC PD 10154I their effect should be evaluated before addition to the formulation.

Packaging & Availability

Packaging Type: Totes (IBC)
Packaging: Crystic® PD 10154I is supplied in 225 kg or 1100 kg containers. Bulk supplies can be delivered by road tanker

Storage & Handling

Storage: Crystic® PD 10154I should be stored in the dark, between 5°C and 25°C in the original, unopened container in a dry, well ventilated, place. Protect from freezing and direct sunlight. Avoid contact with oxidizing agents. If stored outside of these recommendations, shelf life will be significantly reduced.

Crystic® Pipe Relining Resin PD10154I