Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, Type I, 5 mm/min) ¹¹ 100 MPa ASTM D638 Tensile Stress (Yield, Type I, 10 mm/min) ¹¹ 88 MPa SABIC - Japan Method Tensile Strain (Break, Type I, 5 mm/min) ¹¹ 3 % ASTM D638 Tensile Strain (Yield, Type I, 10 mm/min) ¹¹ 6 - 8 % SABIC - Japan Method Tensile Modulus (at 5 mm/min) ¹¹ 6500 MPa ASTM D638 Flexural Stress (Yield, 2.6 mm/min, 100 mm span) ¹¹ 131 MPa ASTM D790 Flexural Modulus (at 2.6 mm/min, 100 mm span) ¹¹ 5570 MPa ASTM D790 Tensile Stress (Yield, 5 mm/min) ¹¹ 90 MPa ISO 527 Tensile Strain (Break, 5 mm/min) ¹¹ 3 % ISO 527 Tensile Modulus (at 1 mm/min) ¹¹ 6000 MPa ISO 527 Flexural Stress (Yield, at 2 mm/min) ¹¹ 150 MPa ISO 178 Flexural Modulus (at 2 mm/min) ¹¹ 5.40E+03 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Specific Gravity ¹¹ 1.23 - ASTM D792 Water Absorption (at 23°C, 24hrs) ¹¹ 0.12 % ISO 62-1 Water Absorption (at 23°C, 24hrs) ¹¹ 0.06 % ASTM D570 Mold Shrinkage (flow) ᵍ ¹¹ 0.2 - 0.4 % SABIC method Melt Flow Rate (at 300°C, 5.0 kgf) ¹¹ 11.7 g/10 min ASTM D1238 Moisture Absorption (at 23°C, 50% RH) ¹¹ 0.04 % ISO 62 Melt Volume Rate (at 280°C, 5.0 kg) ¹¹ 2 cm³/10 min ISO 1133 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 137 °C ASTM D648 Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹ 138 °C ASTM D648 Coefficient of Thermal Expansion (at -30°C to 30°C) ¹¹ 0.000028 - 0.000045 1/°C TMA Vicat Softening Temperature (Rate B/50) ¹¹ 140 °C ISO 306 Vicat Softening Temperature (Rate B/120) ¹¹ 147 °C ISO 306 Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 135 °C ISO 75/Af Relative Temperature Index (Electrical) ᵖ ¹¹ 90 °C UL 746B Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ 90 °C UL 746B Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ 90 °C UL 746B - Electrical Properties
Value Units Test Method / Conditions Comparative Tracking Index (UL, PLC) ¹¹ 4 PLC Code UL 746A High Ampere Arc Ignition (PLC 4) ¹¹ min. 1.5 mm UL 746A Hot Wire Ignition (PLC 1) ¹¹ min. 1.5 mm UL 746A Hot Wire Ignition (PLC 2) ¹¹ min. 3 mm UL 746A Arc Resistance (Tungsten, PLC) ¹¹ 6 PLC Code ASTM D495 High Voltage Arc Track Rate (PLC) ¹¹ 4 PLC Code UL 746A - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, at 23°C) ¹¹ 550 J/m ASTM D4812 Izod Impact (Notched, at 23°C) ¹¹ 88 J/m ASTM D256 Instrumented Dart Impact Total Energy (at 23°C) ¹¹ 20 J ASTM D3763 Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ 30 kJ/m² ISO 180/1U Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 10 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ 9 kJ/m² ISO 180/1A Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ 8 kJ/m² ISO 179/1eA - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 110 - 120 °C - Drying Time ⁷ 3 - 4 Hrs - Drying Time (Cumulative) ⁷ 8 Hrs - Maximum Moisture Content ⁷ 0.02 % - Melt Temperature ⁷ 300 - 325 °C - Nozzle Temperature ⁷ 300 - 325 °C - Front - Zone 3 Temperature ⁷ 290 - 325 °C - Middle - Zone 2 Temperature ⁷ 275 - 320 °C - Rear - Zone 1 Temperature ⁷ 265 - 315 °C - Mold Temperature ⁷ 80 - 110 °C - Back Pressure ⁷ 0.3 - 0.7 MPa - Screw Speed ⁷ 20 - 100 rpm - Shot to Cylinder Size ⁷ 30 - 70 % - - Flame Characteristics
Value Units Test Method / Conditions UL Recognized (94HB Flame Class Rating) ʳ min. 1.5 mm UL 94 UV-light (Water exposure/immersion) ʳ F1 - UL 746C - Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability