Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ 42 MPa ASTM D638 Tensile Strain (Break, Type I, 50 mm/min) ¹¹ 50 % ASTM D638 Flexural Stress (Yield, 2.6 mm/min, 100 mm span) ¹¹ 67 MPa ASTM D790 Flexural Modulus (at 2.6 mm/min, 100 mm span) ¹¹ 2270 MPa ASTM D790 Hardness (Rockwell R) ¹¹ 113 - ASTM D785 - Physical Properties
Value Units Test Method / Conditions Specific Gravity ¹¹ 1.08 - ASTM D792 Water Absorption (at 23°C, 24hrs) ¹¹ 0.07 % ASTM D570 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹ 93 °C ASTM D648 Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹ 82 °C ASTM D648 Coefficient of Thermal Expansion (at -40°C to 95°C, flow) ¹¹ 0.0000738 1/°C ASTM E831 - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength (in oil, at 3.2mm) ¹¹ 24.8 kV/mm ASTM D149 Relative Permittivity (50/60 Hz) ¹¹ 2.8 - ASTM D150 Dissipation Factor (at 50/60 Hz) ¹¹ 0.004 - ASTM D150 Arc Resistance (Tungsten, PLC) ¹¹ 7 PLC Code ASTM D495 High Voltage Arc Track Rate (PLC) ¹¹ 4 PLC Code UL 746A Comparative Tracking Index (UL, PLC) ¹¹ 2 PLC Code UL 746A Dissipation Factor (at at 1 MHz) ¹¹ 0.0035 - IEC 60250 High Ampere Arc Ignition (PLC 0) ¹¹ min. 1.5 mm UL 746A Hot Wire Ignition (PLC 0) ¹¹ min. 6 mm UL 746A Hot Wire Ignition (PLC 1) ¹¹ min. 3 mm UL 746A Hot Wire Ignition (PLC 2) ¹¹ min. 1.5 mm UL 746A - Processing Information (Extrusion)
Value Units Test Method / Conditions Adapter Temperature 205 °C - Barrel - Zone 1 Temperature 170 °C - Barrel - Zone 2 Temperature 170 °C - Barrel - Zone 3 Temperature 190 °C - Barrel - Zone 4 Temperature 190 °C - Die Temperature 205 °C - Drying Temperature 90 - 100 °C - Drying Time 2 - 4 Hrs - Drying Time (Cumulative) 8 Hrs - Maximum Moisture Content 0.02 % - Melt Temperature 195 - 210 °C - - Impact Properties
Value Units Test Method / Conditions Izod Impact (Notched, at 23°C) ¹¹ 389 J/m ASTM D256 Izod Impact (Notched, at -40°C) ¹¹ 160 J/m ASTM D256 Color (at -30°C) ¹¹ 24 J ASTM D3029 Color (at -40°C) ¹¹ 13 J ASTM D3029 - Flame Characteristics
Value Units Test Method / Conditions UL Recognized (94V-0 Flame Class Rating) ʳ min. 3 mm UL 94 UL Recognized (94V-1 Flame Class Rating) ʳ min. 1.5 mm UL 94 - Note
- ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Regulatory & Compliance
- Certifications & Compliance