Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, 50 mm/min) ¹¹ 70 MPa ISO 527 Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ 65 MPa ASTM D638 Tensile Strain (Yield, 50 mm/min) ¹¹ 7 % ISO 527 Tensile Stress (Break, Type I, 50 mm/min) ¹¹ 77 MPa ASTM D638 Tensile Strain (Break, 50 mm/min) ¹¹ min. 50 % ISO 527 Tensile Strain (Break, 50 mm/min) ¹¹ 102 % ISO 527 Tensile Strain (Break, Type I, 50 mm/min) ¹¹ 78 % ASTM D638 Tensile Strain (Yield, Type I, 50 mm/min) ¹¹ 8 % ASTM D638 Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ 97 MPa ASTM D790 Tensile Modulus (at 1 mm/min) ¹¹ 2300 MPa ISO 527 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ 2330 MPa ASTM D790 Flexural Modulus (at 2 mm/min) ¹¹ 2300 MPa ISO 178 Tensile Modulus (at 5 mm/min) ¹¹ 2080 MPa ASTM D638 Hardness (Rockwell M) ¹¹ 92 - ASTM D785 Hardness (Rockwell R) ¹¹ 127 - ISO 2039-2 Hardness (Rockwell R) ¹¹ 127 - ASTM D785 Tensile Stress (Break, 50 mm/min) ¹¹ 68 MPa ISO 527 Flexural Stress (Yield, at 2 mm/min) ¹¹ 66 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Specific Gravity ¹¹ 1.2 - ASTM D792 Specific Volume ¹¹ 0.83 cm³/g ASTM D792 Density ¹¹ 1.2 g/cm³ ISO 1183 Density ¹¹ 1.19 g/cm³ ASTM D792 Water Absorption (at 23°C, 24hrs) ¹¹ 0.19 % ASTM D570 Mold Shrinkage (flow, 3.2 mm) ʰ ¹¹ 0.8 - 1 % SABIC method Mold Shrinkage (on Tensile Bar, flow) ʰ ¹¹ 0.9 % SABIC method Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹ 2 g/10 min ASTM D1238 Melt Volume Rate (at 300°C, 5.0 kg) ¹¹ 6 cm³/10 min ISO 1133 Water Absorption (at 23°C, saturated) ¹¹ 0.16 % ISO 62-1 Moisture Absorption (at 23°C, 50% RH) ¹¹ 0.35 % ISO 62 Melt Volume Rate (at 300°C, 1.2 kg) ¹¹ 2 cm³/10 min ISO 1133 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 148 °C ASTM D648 Coefficient of Thermal Expansion (at -40°C to 95°C, flow) ¹¹ 0.000081 1/°C ASTM E831 Specific Heat ¹¹ 1.25 J/g-°C ASTM C351 Thermal Conductivity ¹¹ 0.21 W/m-°C ASTM C177 Thermal Conductivity ¹¹ 0.21 W/m-°C ISO 8302 Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹ 0.00008 1/°C ISO 11359-2 Relative Temperature Index (Electrical) ᵖ ¹¹ 130 °C UL 746B Ball Pressure Test (at 123°C to 127°C) ¹¹ Pass - IEC 60695-10-2 Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ 130 °C UL 746B Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ 130 °C UL 746B Vicat Softening Temperature (Rate A/50) ¹¹ 185 °C ISO 306 Vicat Softening Temperature (Rate B/50) ¹¹ 165 °C ISO 306 Vicat Softening Temperature (Rate B/50) ¹¹ 173 °C ASTM D1525 Vicat Softening Temperature (Rate B/120) ¹¹ 167 °C ISO 306 Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹ 165 °C ISO 75/Be Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹ 150 °C ISO 75/Ae Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.00006 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.00006 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.00006 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.00006 1/°C ISO 11359-2 Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 150 °C ISO 75/Af - Electrical Properties
Value Units Test Method / Conditions Relative Permittivity (1 MHz) ¹¹ 3.1 - IEC 60250 Relative Permittivity (1 MHz) ¹¹ 3.1 - ASTM D150 Dissipation Factor (at 100 Hz) ¹¹ 0.026 - IEC 60250 Dissipation Factor (at 100 Hz) ¹¹ 0.026 - ASTM D150 Volume Resistivity ¹¹ min. 2.5E+17 Ω.cm ASTM D257 Dielectric Strength (in air, at 3.2mm) ¹¹ 20 kV/mm ASTM D149 Relative Permittivity (50/60 Hz) ¹¹ 3.27 - ASTM D150 Dissipation Factor (at 50/60 Hz) ¹¹ 0.0016 - ASTM D150 Comparative Tracking Index (UL, PLC) ¹¹ 3 PLC Code UL 746A Hot Wire Ignition (PLC 1) ¹¹ min. 6 mm UL 746A Hot Wire Ignition (PLC 2) ¹¹ min. 3 mm UL 746A Hot Wire Ignition (PLC 3) ¹¹ min. 1.5 mm UL 746A High Ampere Arc Ignition (PLC 3) ¹¹ min. 3 mm UL 746A High Ampere Arc Ignition (PLC 4) ¹¹ min. 1.5 mm UL 746A High Voltage Arc Track Rate (PLC) ¹¹ 3 PLC Code UL 746A Arc Resistance (Tungsten, PLC) ¹¹ 6 PLC Code ASTM D495 - Optical Properties
Value Units Test Method / Conditions Light Transmission (at 2.54 mm) ¹¹ 85 % ASTM D1003 Haze (at 2.54 mm) ¹¹ 1 % ASTM D1003 Refractive Index ¹¹ 1.6 - ASTM D542 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹ No break kJ/m² ISO 180/1U Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹ No break kJ/m² ISO 180/1U Izod Impact (Unnotched, at 23°C) ¹¹ 3204 J/m ASTM D4812 Izod Impact (Notched, 80*10*3, at 23°C) ¹¹ 44 kJ/m² ISO 180/1A Izod Impact (Notched, at 23°C) ¹¹ 373 J/m ASTM D256 Izod Impact (Notched, 80*10*3, at -30°C) ¹¹ 11 kJ/m² ISO 180/1A Tensile Impact Strength (Type S) ¹¹ 577 kJ/m² ASTM D1822 Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ 45 kJ/m² ISO 179/1eA Falling Dart Impact (at 23°C) ¹¹ 149 J ASTM D3029 Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ 12 kJ/m² ISO 179/1eA Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ No break kJ/m² ISO 179/1eU Charpy Impact (at -30°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ No break kJ/m² ISO 179/1eU Izod Impact (Notched, at -30°C) ¹¹ 84 J/m ASTM D256 Instrumented Dart Impact Total Energy (at 23°C) ¹¹ 74 J ASTM D3763 Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 7 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ 6 kJ/m² ISO 180/1A - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 120 °C - Drying Temperature ⁷ 125 - 135 °C - Drying Time ⁷ 3 - 4 Hrs - Drying Time (Cumulative) ⁷ 48 Hrs - Melt Temperature ⁷ 325 - 360 °C - Melt Temperature ⁷ 350 - 370 °C - Maximum Moisture Content ⁷ 0.02 % - Nozzle Temperature ⁷ 320 - 340 °C - Nozzle Temperature ⁷ 345 - 365 °C - Front - Zone 3 Temperature ⁷ 320 - 340 °C - Front - Zone 3 Temperature ⁷ 350 - 370 °C - Middle - Zone 2 Temperature ⁷ 310 - 330 °C - Middle - Zone 2 Temperature ⁷ 340 - 360 °C - Rear - Zone 1 Temperature ⁷ 300 - 320 °C - Rear - Zone 1 Temperature ⁷ 325 - 350 °C - Hopper Temperature ⁷ 60 - 80 °C - Mold Temperature ⁷ 80 - 115 °C - Mold Temperature ⁷ 100 - 125 °C - Back Pressure ⁷ 0.3 - 0.7 MPa - Screw Speed ⁷ 40 - 70 rpm - Shot to Cylinder Size ⁷ 40 - 60 % - Vent Depth ⁷ 0.025 - 0.076 mm - - Flame Characteristics
Value Units Test Method / Conditions Glow Wire Flammability Index (passes at 850°C) ʳ ᵖ 2 mm IEC 60695-2-12 UL Recognized (94HB Flame Class Rating) ᵖ min. 1.5 mm UL 94 - Note
- ʰ Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability