Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, Type I, 5 mm/min) ¹ 69.0 MPa ASTM D638 Tensile Stress (Break, Type I, 5 mm/min) ¹ 66.0 MPa ASTM D638 Tensile Strain (Yield, Type I, 5 mm/min) ¹ 4.0 % ASTM D638 Tensile Strain (Break, Type I, 5 mm/min) ¹ 5.0 % ASTM D638 Tensile Modulus (at 5 mm/min) ¹ 3100.0 MPa ASTM D638 Flexural Strength (1.3 mm/min, 50 mm span) ¹ 115.0 MPa ASTM D790 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹ 3200.0 MPa ASTM D790 Taber Abrasion (CS-17, 1 kg) ¹ 75.0 mg/1000cy SABIC method Tensile Stress (Yield, 5 mm/min) ¹ 58.0 MPa ISO 527 Tensile Stress (Break, 5 mm/min) ¹ 55.0 MPa ISO 527 Tensile Strain (Yield, 5 mm/min) ¹ 4.0 % ISO 527 Tensile Strain (Break, 5 mm/min) ¹ 5.0 % ISO 527 Tensile Modulus (at 1 mm/min) ¹ 3100.0 MPa ISO 527 Flexural Strength (2 mm/min) ¹ 100.0 MPa ISO 178 Flexural Modulus (at 2 mm/min) ¹ 3000.0 MPa ISO 178 Ball Indentation Hardness (H358/30) ¹ 140.0 MPa ISO 2039-1 - Physical Properties
Value Units Test Method / Conditions Specific Gravity ¹ 1.13 - ASTM D792 Mold Shrinkage (on Tensile Bar, flow) ³ 0.3 - 0.5 % SABIC method Mold Shrinkage (flow, 3.2 mm) ³ 0.3 - 0.5 % SABIC method Melt Flow Rate (at 300°C/5.0 kgf )¹ 24.0 g/10 min ASTM D1238 Density ¹ 1.25 g/cm³ ISO 1183 Water Absorption (23°C/saturated) ¹ 0.45 % ISO 62-1 Moisture Absorption (23°C / 50% RH) ¹ 0.06 % ISO 62 Melt Volume Rate (at 280°C/5.0 kg) ¹ 10.0 cm³/10 min ISO 1133 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ 120.0 °C ASTM D648 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ 6.6e-05 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ 5.2e-05 1/°C ASTM E831 Thermal Conductivity ¹ 0.28 W/m-°C ISO 8302 Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹ 5.0e-05 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹ 6.0e-05 1/°C ISO 11359-2 Ball Pressure Test, 125°C +/- 2°C ¹ PASSES - IEC 60695-10-2 Approximate Ball Pressure Test ¹ max. 125 °C IEC 60695-10-2 Vicat Softening Temperature (at Rate A/50) ¹ 140.0 °C ISO 306 Vicat Softening Temperature (at Rate B/50) ¹ 140.0 °C ASTM D1525 Vicat Softening Temperature (at Rate B/50) ¹ 130.0 °C ISO 306 Vicat Softening Temperature (at Rate B/120) ¹ 140.0 °C ISO 306 Heat Deflection Temperature/Ae (1.8 MPa Edgew 120*10*4 sp=100mm) ¹ 115.0 °C ISO 75/Ae Relative Temperature Index (Elec) ² 65.0 °C UL 746B Relative Temperature Index (Mech with impact) ² 65.0 °C UL 746B Relative Temperature Index (Mech w/o impact) ² 65.0 °C UL 746B - Electrical Properties
Value Units Test Method / Conditions Volume Resistivity ¹ 1.0e+15 Ω.cm IEC 60093 Surface Resistivity ¹ min. 1.E+15 Ω IEC 60093 Dielectric Strength (in oil, 0.8 mm) ¹ 33.0 kV/mm IEC 60243-1 Dielectric Strength (in oil, 1.6 mm) ¹ 26.0 kV/mm IEC 60243-1 Dielectric Strength (in oil, 3.2 mm) ¹ 16.0 kV/mm IEC 60243-1 Relative Permittivity (at 1 MHz) ¹ 2.9 - IEC 60250 Dissipation Factor (at 50/60 Hz) ¹ 0.006 - IEC 60250 Dissipation Factor (at 1 MHz) ¹ 0.003 - IEC 60250 Comparative Tracking Index ¹ 175.0 V IEC 60112 Relative Permittivity (at 50/60 Hz) ¹ 3.0 - IEC 60250 Comparative Tracking Index (UL) ² 4.0 PLC Code UL 746A High Amp Arc Ignition (HAI, PLC 1) ² min. 3 mm UL 746A High Amp Arc Ignition (HAI, PLC 2) ² min. 1.5 mm UL 746A High Amp Arc Ignition (HAI, PLC 3) ² min. 2 mm UL 746A High Amp Arc Ignition (HAI, PLC 4) ² min. 1.2 mm UL 746A Hot-Wire Ignition (HWI, PLC 0) ² min. 1.2 mm UL 746A High Voltage Arc Track Rate ² 3.0 PLC Code UL 746A Arc Resistance (Tungsten) ² 6.0 PLC Code ASTM D495 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Notched, 23°C) ¹ 50.0 J/m ASTM D256 Izod Impact (Notched, -30°C) ¹ 55.0 J/m ASTM D256 Instrumented Dart Impact Total Energy (at 23°C) ¹ 8.0 J ASTM D3763 Izod Impact (Unnotched 80*10*4 +23°C) ¹ 35.0 kJ/m² ISO 180/1U Izod Impact (Unnotched 80*10*4 -30°C) ¹ 30.0 kJ/m² ISO 180/1U Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹ 40.0 kJ/m² ISO 179/1eU Charpy Impact (at -30°C, Unnotch Edgew 80*10*4 sp=62mm) ¹ 40.0 kJ/m² ISO 179/1eU - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁴ 100 - 120 °C - Drying Time ⁴ 2 - 3 Hrs - Melt Temperature ⁴ 280 - 300 °C - Nozzle Temperature ⁴ 260 - 280 °C - Front - Zone 3 Temperature ⁴ 280 - 300 °C - Middle - Zone 2 Temperature ⁴ 260 - 280 °C - Rear - Zone 1 Temperature ⁴ 240 - 260 °C - Hopper Temperature ⁴ 60 - 80 °C - Mold Temperature ⁴ 80 - 120 °C - - Flame Characteristics
Value Units Test Method / Conditions UL Recognized 94-5VA Flame Class Rating ² min. 3 mm UL 94 UL Recognized 94V-0 Flame Class Rating ² min. 1.5 mm UL 94 UL Recognized 94V-1 Flame Class Rating ² min. 1.2 mm UL 94 Oxygen Index (LOI) ¹ 32.0 % ISO 4589 - Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
(2) UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
(3) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
(4) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
Regulatory & Compliance
- Certifications & Compliance