Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Break, 50 mm/min) ¹ 97.0 MPa ISO 527 Tensile Strain (Break, 50 mm/min) ¹ 2.5 % ISO 527 Tensile Modulus (at 1 mm/min) ¹ 7070.0 MPa ISO 527 Flexural Modulus (at 2 mm/min) ¹ 6540.0 MPa ISO 178 Flexural Stress (Yield, 2 mm/min) ¹ 167.0 MPa ISO 178 Tensile Modulus (at 50 mm/min) ¹ 6200.0 MPa ASTM D638 Tensile Strain (Break, Type I, 50 mm/min) ¹ 2.6 % ASTM D638 Tensile Stress (Break, Type I, 50 mm/min) ¹ 90.0 MPa ASTM D638 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹ 5800.0 MPa ASTM D790 Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹ 160.0 MPa ASTM D790 Hardness (Rockwell L) ¹ 106.0 - ASTM D785 - Physical Properties
Value Units Test Method / Conditions Mold Shrinkage (flow) ¹ 0.2 - 0.5 % SABIC method Melt Volume Rate (at 300°C/5.0 kg) ¹ 8.0 cm³/10 min ISO 1133 Specific Gravity ¹ 1.2 - ASTM D792 Water Absorption (23°C/24hrs) ¹ 0.06 % SABIC method Melt Flow Rate (at 300°C/5.0 kgf )¹ 9.0 g/10 min ASTM D1238 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ 137.0 °C ISO 75/Af Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ 143.0 °C ISO 75/Bf Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ 135.0 °C ASTM D648 Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ 140.0 °C ASTM D648 Vicat Softening Temperature (at Rate B/50) ¹ 143.0 °C ISO 306 Vicat Softening Temperature (at Rate B/120) ¹ 146.0 °C ISO 306 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ 3.3e-05 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ 3.3e-05 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ 9.0e-05 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ 9.0e-05 1/°C ASTM E831 Relative Temperature Index (Elec) ¹ 90.0 °C UL 746B Relative Temperature Index (Mech with impact) ¹ 90.0 °C UL 746B Relative Temperature Index (Mech w/o impact) ¹ 90.0 °C UL 746B - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength (in oil, 3.2 mm) ¹ 16.5 kV/mm ASTM D149 Relative Permittivity (at 50/60 Hz) ¹ 2.86 - ASTM D150 Dissipation Factor (at 50/60 Hz) ¹ 0.0008 - ASTM D150 Hot-Wire Ignition (HWI, PLC 1) ¹ min. 6 mm UL 746A Hot-Wire Ignition (HWI, PLC 4) ¹ min. 1.5 mm UL 746A High Amp Arc Ignition (HAI, PLC 3) ¹ min. 6 mm UL 746A High Voltage Arc Track Rate ¹ 4.0 PLC Code UL 746A Arc Resistance (Tungsten) ¹ 7.0 PLC Code ASTM D495 High Amp Arc Ignition (HAI, PLC 4) ¹ min. 1.5 mm UL 746A - Impact Properties
Value Units Test Method / Conditions Izod Impact (Notched 80*10*4 +23°C) ¹ 11.0 kJ/m² ISO 180/1A Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹ 11.0 kJ/m² ISO 179/1eA Izod Impact (Notched, 23°C) ¹ 119.0 J/m ASTM D256 Izod Impact (Notched, -40°C) ¹ 96.0 J/m ASTM D256 Izod Impact (Unnotched, 23°C) ¹ 650.0 J/m ASTM D4812 Instrumented Dart Impact Total Energy (at 23°C) ¹ 22.0 J ASTM D3763 - Injection Molding
Value Units Test Method / Conditions Drying Temperature ³ 110 - 120 °C - Drying Time ³ 3 - 4 Hrs - Drying Time (Cumulative) ³ 8.0 Hrs - Maximum Moisture Content ³ 0.02 % - Melt Temperature ³ 300 - 325 °C - Rear - Zone 1 Temperature ³ 265 - 315 °C - Middle - Zone 2 Temperature ³ 275 - 320 °C - Front - Zone 3 Temperature ³ 290 - 325 °C - Nozzle Temperature ³ 300 - 325 °C - Mold Temperature ³ 80 - 110 °C - Back Pressure ³ 0.3 - 0.7 MPa - Screw Speed ³ 20 - 100 rpm - Shot to Cylinder Size ³ 30 - 70 % - - Flame Characteristics
Value Units Test Method / Conditions UL Recognized 94HB Flame Class Rating ² min. 1.5 mm UL 94 UV-light Water exposure/immersion ² F1 - UL 746C Oxygen Index (LOI) ² 26.0 % ASTM D2863 - Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
(2) UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
(3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.