Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ 70 MPa ASTM D638 Tensile Stress (Break, Type I, 50 mm/min) ¹¹ 50 MPa ASTM D638 Tensile Strain (Break, Type I, 50 mm/min) ¹¹ 12 % ASTM D638 Tensile Modulus (at 50 mm/min) ¹¹ 2600 MPa ASTM D638 Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ 110 MPa ASTM D790 Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹ 110 MPa ASTM D790 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ 2500 MPa ASTM D790 Tensile Stress (Break, 50 mm/min) ¹¹ 55 MPa ISO 527 Tensile Strain (Break, 50 mm/min) ¹¹ 15 % ISO 527 Tensile Modulus (at 1 mm/min) ¹¹ 2700 MPa ISO 527 Flexural Stress (Break, 2 mm/min) ¹¹ 115 MPa ISO 178 Flexural Modulus (at 2 mm/min) ¹¹ 2600 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Density ¹¹ 1.06 g/cm³ ISO 1183 Melt Volume Rate (at 300°C, 5.0 kg) ¹¹ 10 cm³/10 min ISO 1133 Mold Shrinkage (flow) ᵍ ¹¹ 0.6 - 0.9 % SABIC method Mold Shrinkage (xflow) ᵍ ¹¹ 0.6 - 0.9 % SABIC method - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 160 °C ISO 75/Bf - Electrical Properties
Value Units Test Method / Conditions Dielectric Constant (at 1.1 GHz) ¹¹ 2.54 - SABIC method Dielectric Constant (at 1.9 GHz) ¹¹ 2.55 - SABIC method Dielectric Constant (at 5 GHz) ¹¹ 2.56 - SABIC method Dielectric Constant (at 77 GHz) ¹¹ 2.57 - SABIC method Dissipation Factor (at 1.1 GHz) ¹¹ 0.0008 - SABIC method Dissipation Factor (at 1.9 GHz) ¹¹ 0.0011 - SABIC method Dissipation Factor (at 5 GHz) ¹¹ 0.0015 - SABIC method Dissipation Factor (at 77 GHz) ¹¹ 0.004 - SABIC method - Impact Properties
Value Units Test Method / Conditions Izod Impact (Notched, at 23°C) ¹¹ 50 J/m ASTM D256 Izod Impact (Unnotched, at 23°C) ¹¹ 1050 J/m ASTM D4812 Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 6.00E+00 kJ/m² ISO 180/1A Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ 50 kJ/m² ISO 180/1U - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 120 °C - Drying Time ⁷ 3 - 5 Hrs - Melt Temperature ⁷ 280 - 300 °C - Nozzle Temperature ⁷ 280 - 300 °C - Front - Zone 3 Temperature ⁷ 280 - 300 °C - Middle - Zone 2 Temperature ⁷ 280 - 290 °C - Rear - Zone 1 Temperature ⁷ 270 - 280 °C - Mold Temperature ⁷ 80 - 120 °C - Back Pressure ⁷ 10 MPa - Screw Speed ⁷ 100 rpm - - Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Packaging & Availability
- Country Availability
- Regional Availability