Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Break, 5 mm/min) ¹¹ 200 MPa ISO 527 Tensile Stress (Break) ¹¹ 195 MPa ASTM D638 Tensile Strain (Break, 5 mm/min) ¹¹ 3.3 % ISO 527 Tensile Strain (Break) ¹¹ 2.9 % ASTM D638 Flexural Stress ¹¹ 297 MPa ASTM D790 Tensile Modulus (at 1 mm/min) ¹¹ 10500 MPa ISO 527 Flexural Modulus ¹¹ 10680 MPa ASTM D790 Flexural Stress (Break, 2 mm/min) ¹¹ 290 MPa ISO 178 Flexural Modulus (at 2 mm/min) ¹¹ 10000 MPa ISO 178 Hardness (Rockwell L) ¹¹ 115 - ISO 2039-2 - Physical Properties
Value Units Test Method / Conditions Density ¹¹ 1.42 g/cm³ ASTM D792 Density ¹¹ 1.41 g/cm³ ISO 1183 Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ 0.4 % ASTM D955 Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ 1.4 % ASTM D955 Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹ 0.15 - 0.3 % SABIC method Water Absorption (at 23°C, saturated) ¹¹ 4.5 % ISO 62-1 Moisture Absorption (at 23°C, 50% RH) ¹¹ 1.10E+00 % ISO 62 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 250 °C ASTM D648 Thermal Conductivity ¹¹ 0.33 W/m-°C ISO 8302 Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ 0.00002 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ 0.00008 1/°C ISO 11359-2 Ball Pressure Test (at 123°C to 127°C) ¹¹ Pass - IEC 60695-10-2 Vicat Softening Temperature (Rate B/50) ¹¹ 256 °C ISO 306 Vicat Softening Temperature (Rate B/120) ¹¹ 255 °C ISO 306 Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹ 260 °C ISO 75/Be Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹ 258 °C ISO 75/Ae - Electrical Properties
Value Units Test Method / Conditions Volume Resistivity ¹¹ min. 1.E+16 Ω.cm IEC 60093 Surface Resistivity (ROA) ¹¹ min. 1.E+16 Ω IEC 60093 Dielectric Strength (in oil, at 3.2mm) ¹¹ 19 kV/mm IEC 60243-1 Relative Permittivity (1 MHz) ¹¹ 3.2 - IEC 60250 Dissipation Factor (at 50/60 Hz) ¹¹ 0.0068 - IEC 60250 Dissipation Factor (at at 1 MHz) ¹¹ 0.015 - IEC 60250 Comparative Tracking Index ¹¹ 500 V IEC 60112 Comparative Tracking Index (M) ¹¹ 375 V IEC 60112 Relative Permittivity (50/60 Hz) ¹¹ 3.4 - IEC 60250 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, at 23°C) ¹¹ 1228 J/m ASTM D4812 Izod Impact (Notched, at 23°C) ¹¹ 106 J/m ASTM D256 Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 12 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*4, at -20°C) ¹¹ 11 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ 10 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*4, at -40°C) ¹¹ 9 kJ/m² ISO 180/1A Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ 10 kJ/m² ISO 179/1eA Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ 9 kJ/m² ISO 179/1eA Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ 85 kJ/m² ISO 179/1eU Charpy Impact (at -30°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ 65 kJ/m² ISO 179/1eU - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 80 °C - Drying Temperature ⁷ 75 - 85 °C - Drying Time ⁷ 4 Hrs - Drying Time ⁷ 4 - 6 Hrs - Maximum Moisture Content ⁷ 0.15 - 0.25 % - Maximum Moisture Content ⁷ 0.2 % - Melt Temperature ⁷ 260 - 290 °C - Melt Temperature ⁷ 280 - 305 °C - Front - Zone 3 Temperature ⁷ 295 - 305 °C - Front - Zone 3 Temperature ⁷ 260 - 280 °C - Nozzle Temperature ⁷ 250 - 270 °C - Middle - Zone 2 Temperature ⁷ 260 - 280 °C - Middle - Zone 2 Temperature ⁷ 280 - 295 °C - Rear - Zone 1 Temperature ⁷ 265 - 275 °C - Rear - Zone 1 Temperature ⁷ 270 - 290 °C - Mold Temperature ⁷ 70 - 120 °C - Mold Temperature ⁷ 95 - 110 °C - Back Pressure ⁷ 0.2 - 0.3 MPa - Hopper Temperature ⁷ 60 - 80 °C - Screw Speed ⁷ 30 - 60 rpm - - Flame Characteristics
Value Units Test Method / Conditions Glow Wire Flammability Index (passes at 650°C) 2 mm IEC 60695-2-12 Oxygen Index (LOI) 26 % ISO 4589 FMVSS Burning Speed (Thickness 2 mm) 6 mm/min FMVSS 302 FMVSS Burning Speed (Thickness 3 mm) 2 mm/min FMVSS 302 - Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.