Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Break) ¹¹ 183 MPa ISO 527 Tensile Stress (Break) ¹¹ 171 MPa ASTM D638 Tensile Strain (Break) ¹¹ 3.3 % ASTM D638 Tensile Modulus (at 50 mm/min) ¹¹ 12420 MPa ASTM D638 Flexural Stress ¹¹ 255 MPa ASTM D790 Flexural Modulus ¹¹ 10790 MPa ASTM D790 Flexural Modulus ¹¹ 10780 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Density ¹¹ 1.41 g/cm³ ASTM D792 Density ¹¹ 1.42 g/cm³ ISO 1183 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ 219 °C ASTM D648 Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 207 °C ASTM D648 Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 214 °C ISO 75/Af - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, at 23°C) ¹¹ 1121 J/m ASTM D4812 Izod Impact (Notched, at 23°C) ¹¹ 138 J/m ASTM D256 Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 15 kJ/m² ISO 180/1A - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 80 °C - Drying Time ⁷ 4 Hrs - Maximum Moisture Content ⁷ 0.12 - 0.2 % - Melt Temperature ⁷ 270 - 275 °C - Front - Zone 3 Temperature ⁷ 270 - 280 °C - Middle - Zone 2 Temperature ⁷ 260 - 270 °C - Rear - Zone 1 Temperature ⁷ 250 - 260 °C - Mold Temperature ⁷ 80 - 95 °C - Back Pressure ⁷ 0.2 - 0.3 MPa - Screw Speed ⁷ 30 - 60 rpm - - Note
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Packaging & Availability
- Country Availability
- Regional Availability