Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, Type I, 5 mm/min) ¹¹ 34 MPa ASTM D638 Tensile Stress (Break, Type I, 5 mm/min) ¹¹ 30 MPa ASTM D638 Tensile Strain (Yield, Type I, 5 mm/min) ¹¹ 3.9 % ASTM D638 Tensile Strain (Break, Type I, 5 mm/min) ¹¹ 6.7 % ASTM D638 Tensile Modulus (at 5 mm/min) ¹¹ 4080 MPa ASTM D638 Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ 50 MPa ASTM D790 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ 2970 MPa ASTM D790 - Physical Properties
Value Units Test Method / Conditions Density ¹¹ 1.05 g/cm³ ASTM D792 Melt Flow Rate (at 210°C, 5 kgf) ¹¹ 12 - 20 g/10 min ASTM D1238 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 100 °C ASTM D648 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Notched, at 23°C) ¹¹ 39 J/m ASTM D256 - Injection Molding
Value Units Test Method / Conditions Back Pressure ⁷ 0.2 - 0.3 MPa - Drying Temperature ⁷ 80 °C - Drying Time ⁷ 4 Hrs - Front - Zone 3 Temperature ⁷ 240 - 250 °C - Melt Temperature ⁷ 225 - 250 °C - Middle - Zone 2 Temperature ⁷ 215 - 225 °C - Mold Temperature ⁷ 30 - 50 °C - Rear - Zone 1 Temperature ⁷ 195 - 205 °C - Screw Speed ⁷ 30 - 60 rpm - - Note
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Packaging & Availability
- Country Availability
- Regional Availability