Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Break) ¹¹ 188 MPa ASTM D638 Tensile Stress (Break) ¹¹ 177 MPa ISO 527 Tensile Stress (Yield, 5 mm/min) ¹¹ 169 MPa ISO 527 Tensile Strain (Break, 5 mm/min) ¹¹ 2 % ISO 527 Tensile Strain (Break) ¹¹ 2.4 % ASTM D638 Tensile Strain (Break) ¹¹ 2.2 % ISO 527 Tensile Modulus (at 1 mm/min) ¹¹ 10350 MPa ISO 527 Tensile Modulus (at 50 mm/min) ¹¹ 11440 MPa ASTM D638 Flexural Stress (Yield, at 2 mm/min) ¹¹ 235 MPa ISO 178 Flexural Stress ¹¹ 263 MPa ISO 178 Flexural Stress ¹¹ 270 MPa ASTM D790 Flexural Modulus (at 2 mm/min) ¹¹ 9200 MPa ISO 178 Flexural Modulus ¹¹ 11370 MPa ASTM D790 Flexural Modulus ¹¹ 11510 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Mold Shrinkage (flow) ᵍ ¹¹ 0.2 - 0.4 % SABIC method Density ¹¹ 1.52 g/cm³ ISO 1183 Density ¹¹ 1.528 g/cm³ ASTM D792 Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ 0.15 % ASTM D570 Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ 0.2 % ASTM D955 Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ 0.23 % ISO 294 Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ 0.5 % ASTM D955 Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ 0.49 % ISO 294 Wear Factor Washer ¹¹ 130 10^-10 in^5-min/ft-lb-hr ASTM D3702 Modified: Manual Dynamic COF ¹¹ 0.55 - ASTM D3702 Modified: Manual Static COF ¹¹ 0.5 - ASTM D3702 Modified: Manual Moisture Absorption (at 23°C, 50% RH) ¹¹ 0.21 % ISO 62 - Thermal Properties
Value Units Test Method / Conditions Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ 0.000018 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ 0.000043 1/°C ISO 11359-2 Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 214 °C ISO 75/Bf Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 209 °C ISO 75/Af Relative Temperature Index (Electrical) ᵖ ¹¹ 105 °C UL 746B Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ 105 °C UL 746B Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ 105 °C UL 746B Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 203 °C ASTM D648 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.0000306 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.0000309 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.0000414 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.0000416 1/°C ISO 11359-2 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ 45 kJ/m² ISO 180/1U Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 10 kJ/m² ISO 180/1A Izod Impact (Unnotched, at 23°C) ¹¹ 758 J/m ASTM D4812 Izod Impact (Notched, at 23°C) ¹¹ 106 J/m ASTM D256 Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹ 12 J ASTM D3763 Multi-Axial Impact ¹¹ 2 J ISO 6603 - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 150 °C - Drying Time ⁷ 4 - 6 Hrs - Maximum Moisture Content ⁷ 0.02 % - Melt Temperature ⁷ 360 - 400 °C - Rear - Zone 1 Temperature ⁷ 360 - 380 °C - Middle - Zone 2 Temperature ⁷ 370 - 390 °C - Front - Zone 3 Temperature ⁷ 380 - 400 °C - Nozzle Temperature ⁷ 390 - 400 °C - Mold Temperature ⁷ 140 - 180 °C - Back Pressure ⁷ 0.3 - 0.7 MPa - Screw Speed (Circumferential speed) ⁷ 0.2 - 0.3 m/s - Vent Depth ⁷ 0.025 - 0.076 mm - - Flame Characteristics
Value Units Test Method / Conditions UL Recognized (94V-0 Flame Class Rating) ᵖ min. 0.75 mm UL 94 - Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Regulatory & Compliance
- Certifications & Compliance