Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Wear and Friction Solutions High Temperature Materials
Design engineer look to replace metal parts and components with thermoplastics whenever possible. Not only can they be produced more cost-effectively, they offer greater design flexibility, weigh less and resist corrosion. The availability of high temperature resins like PEEK, PPS, PPA and PEI can stretch the use of thermoplastic even further.
If you can’t stand the heat… internally lubricated compounds: While auto under-the-hood and industrial machinery might be the first to come to mind, high temperature application are not always driven by hot operating environment. Some application that may never see elevated use temperatures have to survive a hot manufacturing environment (lead-free solder, paint ovens). High temperature generally feature good chemical resistance as well.
Internally lubricated compounds:
The addition of an internal lubricant to a thermoplastic material can improve the wear resistance and can reduce the coefficient of friction in plastic parts. Traditional lubricants like PTFE and PTFE/Si blends are common. Compounds made with high temperature resins can provide wear performance comparable with externally lubricated metal parts.
- Product Features
- FM: 21.1GPa
- HDT:263C
- Low wear and COF
- Chemical resistance
- Dimensional accuracy
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Break, 5 mm/min) ¹¹ 166 MPa ISO 527 Tensile Stress (Break) ¹¹ 168 MPa ASTM D638 Tensile Stress (Break) ¹¹ 166 MPa ISO 527 Tensile Strain (Break, 5 mm/min) ¹¹ 0.8 % ISO 527 Tensile Strain (Break) ¹¹ 1.4 % ASTM D638 Tensile Strain (Break) ¹¹ 1.1 % ISO 527 Tensile Modulus (at 1 mm/min) ¹¹ 24900 MPa ISO 527 Tensile Modulus (at 1 mm/min) ¹¹ 30680 MPa ISO 527 Tensile Modulus (at 5 mm/min) ¹¹ 21510 MPa ASTM D638 Flexural Stress (Break, 2 mm/min) ¹¹ 219 MPa ISO 178 Flexural Stress ¹¹ 259 MPa ASTM D790 Flexural Stress ¹¹ 262 MPa ISO 178 Flexural Modulus (at 2 mm/min) ¹¹ 21200 MPa ISO 178 Flexural Modulus ¹¹ 21110 MPa ASTM D790 Flexural Modulus ¹¹ 21200 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ 0.2 - 0.4 % ASTM D955 Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ 0.2 - 0.4 % ISO 294 Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ 0.05 - 0.1 % ISO 294 Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ 0.3 - 0.4 % ASTM D955 Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ 0.36 - 0.4 % ISO 294 Wear Factor Washer ¹¹ 19 10^-10 in^5-min/ft-lb-hr ASTM D3702 Modified: Manual Dynamic COF ¹¹ 0.39 - ASTM D3702 Modified: Manual Static COF ¹¹ 0.34 - ASTM D3702 Modified: Manual Density ¹¹ 1.52 g/cm³ ISO 1183 Density ¹¹ 1.52 g/cm³ ASTM D792 Melt Volume Rate (at 315°C, 5.0 kg) ¹¹ 8 cm³/10 min ISO 1133 Moisture Absorption (at 23°C, 50% RH) ¹¹ 0.03 % ISO 62 - Thermal Properties
Value Units Test Method / Conditions Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ 0.000003 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ 0.000055 1/°C ISO 11359-2 Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 278 °C ISO 75/Bf Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 263 °C ISO 75/Af Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 267 °C ASTM D648 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.0000162 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.0000176 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.0000342 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.0000344 1/°C ISO 11359-2 - Electrical Properties
Value Units Test Method / Conditions Surface Resistivity ¹¹ 10 - 1000 Ω ASTM D257 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ 25 kJ/m² ISO 180/1U Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ 31 kJ/m² ISO 180/1U Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 5 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 6 kJ/m² ISO 180/1A Izod Impact (Unnotched, at 23°C) ¹¹ 4.43E+02 J/m ASTM D4812 Izod Impact (Notched, at 23°C) ¹¹ 58 J/m ASTM D256 Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹ 15 J ASTM D3763 Multi-Axial Impact ¹¹ 2 J ISO 6603 - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 120 - 150 °C - Drying Time ⁷ 4 Hrs - Melt Temperature ⁷ 315 - 320 °C - Front - Zone 3 Temperature ⁷ 330 - 345 °C - Middle - Zone 2 Temperature ⁷ 320 - 330 °C - Rear - Zone 1 Temperature ⁷ 305 - 315 °C - Mold Temperature ⁷ 140 - 165 °C - Back Pressure ⁷ 0.2 - 0.3 MPa - Screw Speed ⁷ 30 - 60 rpm - - Flame Characteristics
Value Units Test Method / Conditions UL Compliant (94V-0 Flame Class Rating) ¹¹ 1.8 mm UL 94 by SABIC-IP - Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability