Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus (1.3 mm/min, 50 mm span)⁴⁹ 2140 MPa ASTM D790 Flexural Modulus (2 mm/min)⁴⁹ 2070 MPa ISO 178 Flexural Stress at Yield (1.3 mm/min, 50 mm span)⁴⁹ 90 MPa ASTM D790 Flexural Stress at Yield (2 mm/min)⁴⁹ 88 MPa ISO 178 Tensile Modulus (1 mm/min)⁴⁹ 2150 MPa ISO 527 Tensile Modulus (5 mm/min)⁴⁹ 2140 MPa ASTM D638 Tensile Strain at Break (50 mm/min)⁴⁹ 115 % ISO 527 Tensile Strain at Break (Type I, 50 mm/min)⁴⁹ 110 % ASTM D638 Tensile Strain at Yield (50 mm/min)⁴⁹ 6 % ISO 527 Tensile Strain at Yield (Type I, 50 mm/min)⁴⁹ 6 % ASTM D638 Tensile Stress at Break (50 mm/min)⁴⁹ 63 MPa ISO 527 Tensile Stress at Break (Type I, 50 mm/min)⁴⁹ 63 MPa ASTM D638 Tensile Stress at Yield (50 mm/min)⁴⁹ 57 MPa ISO 527 Tensile Stress at Yield (Type I, 50 mm/min)⁴⁹ 57 MPa ASTM D638 - Physical Properties
Value Units Test Method / Conditions Density⁴⁹ 1.19 g/cm³ ISO 1183 Melt Flow Rate (at 300°C/1.2 kgf)⁴⁹ 12 g/10 min ASTM D1238 Melt Volume Rate (at 300°C/1.2 kg)⁴⁹ 11 cm³/10 min ISO 1133 Moisture Absorption (at 23°C / 50% RH)⁴⁹ 0.11 % ISO 62 Mold Shrinkage - flow (3.2 mm)¹²,⁴⁹ 0.4 - 0.8 % SABIC method Mold Shrinkage - xflow (3.2 mm)¹²,⁴⁹ 0.4 - 0.8 % SABIC method Specific Gravity⁴⁹ 1.19 - ASTM D792 Water Absorption (at 23°C/Saturated)⁴⁹ 0.17 % ISO 62-1 - Thermal Properties
Value Units Test Method / Conditions CTE - flow (at -40°C to 40°C)⁴⁹ 6.7e-05 1/°C ASTM E831 CTE - xflow (at -40°C to 40°C)⁴⁹ 6.9e-05 1/°C ASTM E831 HDT - Unannealed (1.82 MPa, 3.2mm)⁴⁹ 119 °C ASTM D648 HDT/Af (1.8 MPa Flatw 80*10*4 sp=64mm)⁴⁹ 119 °C ISO 75/Af Vicat Softening Temperature Rate (A/50)⁴⁹ 147 °C ASTM D1525 - Electrical Properties
Value Units Test Method / Conditions Surface Resistivity⁴⁹ min. 1E+15 Ω ASTM D257 Volume Resistivity⁴⁹ min. 1E+15 Ω.cm ASTM D257 - Optical Properties
Value Units Test Method / Conditions Haze (2.54 mm)⁴⁹ 2.2 % ASTM D1003 Light Transmission (at 2.54 mm)⁴⁹ 86 % ASTM D1003 - Impact Properties
Value Units Test Method / Conditions Charpy (at 23°C, Unnotch Edgew 80*10*3 sp=62mm)⁴⁹ NB kJ/m² ISO 179/1eU Charpy (at 23°C, V-notch Edgew 80*10*3 sp=62mm)⁴⁹ 66 kJ/m² ISO 179/1eA Charpy (at -30°C, Unnotch Edgew 80*10*3 sp=62mm)⁴⁹ NB kJ/m² ISO 179/1eU Charpy (at -30°C, V-notch Edgew 80*10*3 sp=62mm)⁴⁹ 34 kJ/m² ISO 179/1eA Instrumented Dart Impact Total Energy (at 23°C)⁴⁹ 71 J ASTM D3763 Instrumented Dart Impact Total Energy (at -30°C)⁴⁹ 85 J ASTM D3763 Izod Impact - Notched (at -20°C)⁴⁹ 690 J/m ASTM D256 Izod Impact - Unnotched (80*10*3 +23°C)⁴⁹ NB kJ/m² ISO 180/1U Izod Impact - Unnotched (80*10*3 -30°C)⁴⁹ NB kJ/m² ISO 180/1U Izod Impact Notched (80*10*3 +23°C)⁴⁹ 61 kJ/m² ISO 180/1A Izod Impact Notched (80*10*3 -30°C)⁴⁹ 46 kJ/m² ISO 180/1A Izod Impact Notched (at 23°C)⁴⁹ 800 J/m ASTM D256 Izod Impact Notched (at -30°C)⁴⁹ 610 J/m ASTM D256 - Injection Molding
Value Units Test Method / Conditions Back Pressure⁴² 0.3 - 0.7 MPa - Drying Temperature⁴² 120 °C - Drying Time (Cumulative)⁴² 48 Hrs - Drying Time⁴² 3 - 4 Hrs - Front - Zone 3 Temperature⁴² 295 - 315 °C - Maximum Moisture Content⁴² 0.02 % - Melt Temperature⁴² 295 - 315 °C - Middle - Zone 2 Temperature⁴² 280 - 305 °C - Mold Temperature⁴² 70 - 95 °C - Nozzle Temperature⁴² 290 - 310 °C - Rear - Zone 1 Temperature⁴² 275 - 295 °C - Screw Speed⁴² 40 - 70 rpm - Shot to Cylinder Size⁴² 40 - 60 % - Vent Depth⁴² 0.025 - 0.076 mm - - Flame Characteristics
Value Units Test Method / Conditions Glow Wire Flammability Index (at 960°C)⁵⁹ 3 mm IEC 60695-2-12 Glow Wire Ignitability Temperature (3.0 mm)⁵⁹ 875 °C IEC 60695-2-13 UL Recognized 94HB Flame Class Rating⁵⁹ min. 0.4 mm UL 94 - Note
- ⁴² Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ⁴⁹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- ⁵⁹ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ¹² Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability