Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, 50 mm/min) ¹ 77.0 MPa ISO 527 Tensile Stress (Break, 50 mm/min) ¹ 61.0 MPa ISO 527 Tensile Strain (Yield, 50 mm/min) ¹ 7.0 % ISO 527 Tensile Strain (Break, 50 mm/min) ¹ 92.0 % ISO 527 Tensile Modulus (at 1 mm/min) ¹ 2474.0 MPa ISO 527 Flexural Modulus (at 2 mm/min) ¹ 2503.0 MPa ISO 178 Flexural Stress (Yield, 2 mm/min) ¹ 108.0 MPa ISO 178 Tensile Modulus (at 50 mm/min) ¹ 2630.0 MPa ASTM D638 Tensile Strain (Break, Type I, 50 mm/min) ¹ 80.0 % ASTM D638 Tensile Strain (Yield, Type I, 50 mm/min) ¹ 8.0 % ASTM D638 Tensile Stress (Break, Type I, 50 mm/min) ¹ 63.0 MPa ASTM D638 Tensile Stress (Yield, Type I, 50 mm/min) ¹ 78.0 MPa ASTM D638 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹ 2490.0 MPa ASTM D790 Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹ 121.0 MPa ASTM D790 Pencil Hardness Test (0.5 kgf) ¹ F - ASTM D3363 Hardness (Rockwell M) ¹ 89.0 - ASTM D785 - Physical Properties
Value Units Test Method / Conditions Density ¹ 1.18 g/cm³ ISO 1183 Moisture Absorption (23°C/50% RH/24 hrs) ¹ 0.04 % ASTM D570 Water Absorption (23°C/24hrs) ¹ 0.09 % ASTM D570 Specific Gravity ¹ 1.18 - ASTM D792 Mold Shrinkage (flow, 24 hrs) ¹ 0.5 - 0.8 % ASTM D955 Mold Shrinkage (xflow, 24 hrs) ¹ 0.5 - 0.8 % ASTM D955 Melt Volume Rate (at 300°C/1.2 kg) ¹ 14.0 cm³/10 min ISO 1133 Melt Volume Rate (at 300°C/1.2 kg) ¹ 14.0 cm³/10 min ASTM D1238 Melt Flow Rate (at 300°C/1.2 kgf) ¹ 16.0 g/10 min ASTM D1238 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ 118.0 °C ISO 75/Af Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ 132.0 °C ISO 75/Bf Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ 120.0 °C ASTM D648 Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ 133.0 °C ASTM D648 Vicat Softening Temperature (at Rate B/50) ¹ 138.0 °C ISO 306 Vicat Softening Temperature (at Rate B/50) ¹ 138.0 °C ASTM D1525 Vicat Softening Temperature (at Rate B/120) ¹ 140.0 °C ISO 306 Vicat Softening Temperature (at Rate B/120) ¹ 140.0 °C ASTM D1525 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ 6.8e-05 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ 6.8e-05 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ 7.0e-05 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ 7.0e-05 1/°C ASTM E831 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Notched 80*10*3 +23°C) ¹ 3.0 kJ/m² ISO 180/1A Izod Impact (Notched 80*10*3 -30°C) ¹ 20.0 kJ/m² ISO 180/1A Izod Impact (Unnotched 80*10*3 +23°C) ¹ 169.0 kJ/m² ISO 180/1U Izod Impact (Unnotched 80*10*3 -30°C )¹ 87.0 kJ/m² ISO 180/1U Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹ 2.0 kJ/m² ISO 179/1eA Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹ 1.0 kJ/m² ISO 179/1eA Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹ 324.0 kJ/m² ISO 179/1eU Charpy Impact (at -30°C, Unnotch Edgew 80*10*3 sp=62mm) ¹ 93.0 kJ/m² ISO 179/1eU Izod Impact (Notched, 23°C) ¹ 30.0 J/m ASTM D256 Izod Impact (Notched, 0°C) ¹ 32.0 J/m ASTM D256 Izod Impact (Notched, -30°C) ¹ 31.0 J/m ASTM D256 Izod Impact (Unnotched, 23°C) ¹ NB J/m ASTM D4812 Izod Impact (Unnotched, -30°C) ¹ 1440.0 J/m ASTM D4812 Instrumented Dart Impact Total Energy (at 23°C) ¹ 39.0 J ASTM D3763 - Injection Molding
Value Units Test Method / Conditions Drying Temperature ² 120.0 °C - Drying Time ² 3 - 4 Hrs - Maximum Moisture Content ² 0.02 % - Melt Temperature ² 295 - 315 °C - Rear - Zone 1 Temperature ² 260 - 280 °C - Middle - Zone 2 Temperature ² 280 - 305 °C - Front - Zone 3 Temperature ² 295 - 315 °C - Nozzle Temperature ² 290 - 310 °C - Mold Temperature ² 70 - 95 °C - - Note
¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
² ;Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.