Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ 62 MPa ASTM D638 Tensile Stress (Break, Type I, 50 mm/min) ¹¹ 65 MPa ASTM D638 Tensile Strain (Break, Type I, 50 mm/min) ¹¹ 120 % ASTM D638 Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ 93 MPa ASTM D790 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ 2300 MPa ASTM D790 - Physical Properties
Value Units Test Method / Conditions Specific Gravity ¹¹ 1.2 - ASTM D792 Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹ 0.5 - 0.7 % SABIC method Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹ 25 g/10 min ASTM D1238 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 126 °C ASTM D648 Relative Temperature Index (Electrical) ᵖ ¹¹ 130 °C UL 746B Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ 130 °C UL 746B Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ 130 °C UL 746B - Electrical Properties
Value Units Test Method / Conditions Hot Wire Ignition (PLC) ¹¹ 2 PLC Code UL 746A High Voltage Arc Track Rate (PLC) ¹¹ 2 PLC Code UL 746A High Ampere Arc Ignition (Surface, PLC) ¹¹ 1 PLC Code UL 746A Comparative Tracking Index (UL, PLC) ¹¹ 2 PLC Code UL 746A Hot Wire Ignition (PLC 2) ¹¹ min. 1.5 mm UL 746A Hot Wire Ignition (PLC 3) ¹¹ min. 1.1 mm UL 746A High Ampere Arc Ignition (PLC 0) ¹¹ min. 1.5 mm UL 746A High Ampere Arc Ignition (PLC 1) ¹¹ min. 3 mm UL 746A High Ampere Arc Ignition (PLC 2) ¹¹ min. 1.5 mm UL 746A - Optical Properties
Value Units Test Method / Conditions Light Transmission (at 2.54 mm) ¹¹ 88 % ASTM D1003 Haze (at 2.54 mm) ¹¹ 1 % ASTM D1003 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Notched, at 23°C) ¹¹ 640 J/m ASTM D256 Tensile Impact Strength (Type S) ¹¹ 378 kJ/m² ASTM D1822 Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹ 54 J ASTM D3763 - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 120 °C - Drying Time ⁷ 3 - 4 Hrs - Drying Time (Cumulative) ⁷ 48 Hrs - Maximum Moisture Content ⁷ 0.02 % - Melt Temperature ⁷ 270 - 295 °C - Nozzle Temperature ⁷ 265 - 290 °C - Front - Zone 3 Temperature ⁷ 270 - 295 °C - Middle - Zone 2 Temperature ⁷ 260 - 280 °C - Rear - Zone 1 Temperature ⁷ 250 - 270 °C - Mold Temperature ⁷ 70 - 95 °C - Back Pressure ⁷ 0.3 - 0.7 MPa - Screw Speed ⁷ 40 - 70 rpm - Shot to Cylinder Size ⁷ 40 - 60 % - Vent Depth ⁷ 0.025 - 0.076 mm - - Flame Characteristics
Value Units Test Method / Conditions UL Recognized (94V-2 Flame Class Rating) ᵖ min. 1.1 mm UL 94 - Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability