Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, 50 mm/min) ¹¹ 60 MPa ISO 527 Tensile Stress (Break, 50 mm/min) ¹¹ 50 MPa ISO 527 Tensile Strain (Yield, 50 mm/min) ¹¹ 6 % ISO 527 Tensile Strain (Break, 50 mm/min) ¹¹ 60 % ISO 527 Tensile Modulus (at 1 mm/min) ¹¹ 2500 MPa ISO 527 Flexural Stress (Yield, at 2 mm/min) ¹¹ 90 MPa ISO 178 Flexural Modulus (at 2 mm/min) ¹¹ 2400 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Density ¹¹ 1.33 g/cm³ ISO 1183 Water Absorption (at 23°C, saturated) ¹¹ 0.35 % ISO 62-1 Moisture Absorption (at 23°C, 50% RH) ¹¹ 0.15 % ISO 62 Melt Volume Rate (at 300°C, 1.2 kg) ¹¹ 21 cm³/10 min ISO 1133 - Thermal Properties
Value Units Test Method / Conditions Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.00006 1/°C ISO 11359-2 Vicat Softening Temperature (Rate B/50) ¹¹ 140 °C ISO 306 Vicat Softening Temperature (Rate B/120) ¹¹ 141 °C ISO 306 - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹ No break kJ/m² ISO 180/1U Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹ No break kJ/m² ISO 180/1U Izod Impact (Notched, 80*10*3, at 23°C) ¹¹ 60 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*3, at -30°C) ¹¹ 10 kJ/m² ISO 180/1A Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ 60 kJ/m² ISO 179/1eA Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ 10 kJ/m² ISO 179/1eA Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ No break kJ/m² ISO 179/1eU Charpy Impact (at -30°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ No break kJ/m² ISO 179/1eU - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 120 °C - Drying Time ⁷ 2 - 4 Hrs - Maximum Moisture Content ⁷ 0.02 % - Melt Temperature ⁷ 280 - 300 °C - Nozzle Temperature ⁷ 270 - 290 °C - Front - Zone 3 Temperature ⁷ 280 - 300 °C - Middle - Zone 2 Temperature ⁷ 270 - 290 °C - Rear - Zone 1 Temperature ⁷ 260 - 280 °C - Hopper Temperature ⁷ 60 - 80 °C - Mold Temperature ⁷ 80 - 100 °C - - Note
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Packaging & Availability
- Regional Availability