Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, 50 mm/min) ¹¹ 63 MPa ISO 527 Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ 62 MPa ASTM D638 Tensile Stress (Break, 50 mm/min) ¹¹ 65 MPa ISO 527 Tensile Stress (Break, Type I, 50 mm/min) ¹¹ 68 MPa ASTM D638 Tensile Strain (Yield, 50 mm/min) ¹¹ 6 % ISO 527 Tensile Strain (Yield, Type I, 50 mm/min) ¹¹ 7 % ASTM D638 Tensile Strain (Break, 50 mm/min) ¹¹ 100 % ISO 527 Tensile Strain (Break, Type I, 50 mm/min) ¹¹ 125 % ASTM D638 Tensile Modulus (at 1 mm/min) ¹¹ 2350 MPa ISO 527 Tensile Modulus (at 50 mm/min) ¹¹ 2170 MPa ASTM D638 Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ 96 MPa ASTM D790 Flexural Stress (Yield, at 2 mm/min) ¹¹ 90 MPa ISO 178 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ 2340 MPa ASTM D790 Flexural Modulus (at 2 mm/min) ¹¹ 2300 MPa ISO 178 Ball Indentation Hardness (H358/30) ¹¹ 95 MPa ISO 2039-1 - Physical Properties
Value Units Test Method / Conditions Specific Gravity ¹¹ 1.2 - ASTM D792 Mold Shrinkage (flow, 3.2 mm) ʰ ¹¹ 0.5 - 0.7 % SABIC method Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹ 18.2 g/10 min ASTM D1238 Mold Shrinkage (on Tensile Bar, flow) ʰ ¹¹ 0.5 - 0.7 % SABIC method Density ¹¹ 1.2 g/cm³ ISO 1183 Water Absorption (at 23°C, saturated) ¹¹ 0.35 % ISO 62-1 Moisture Absorption (at 23°C, 50% RH) ¹¹ 0.15 % ISO 62 Melt Volume Rate (at 300°C, 1.2 kg) ¹¹ 21 cm³/10 min ISO 1133 - Thermal Properties
Value Units Test Method / Conditions Vicat Softening Temperature (Rate B/50) ¹¹ 140 °C ISO 306 Vicat Softening Temperature (Rate B/50) ¹¹ 154 °C ASTM D1525 Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ 137 °C ASTM D648 Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 126 °C ASTM D648 Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹ 137 °C ASTM D648 Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹ 129 °C ASTM D648 Relative Temperature Index (Electrical) ᵖ ¹¹ 130 °C UL 746B Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹ 0.00007 1/°C ISO 11359-2 Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ 130 °C UL 746B Ball Pressure Test (at 123°C to 127°C) ¹¹ Pass - IEC 60695-10-2 Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ 130 °C UL 746B Vicat Softening Temperature (Rate B/120) ¹¹ 141 °C ISO 306 Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹ 133 °C ISO 75/Be Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹ 122 °C ISO 75/Ae - Electrical Properties
Value Units Test Method / Conditions Comparative Tracking Index (UL, PLC) ¹¹ 2 PLC Code UL 746A High Ampere Arc Ignition (PLC 0) ¹¹ min. 1.5 mm UL 746A High Ampere Arc Ignition (PLC 1) ¹¹ min. 3 mm UL 746A High Ampere Arc Ignition (PLC 2) ¹¹ min. 1.1 mm UL 746A Hot Wire Ignition (PLC 2) ¹¹ min. 1.5 mm UL 746A Hot Wire Ignition (PLC 3) ¹¹ min. 1.1 mm UL 746A High Voltage Arc Track Rate (PLC) ¹¹ 2 PLC Code UL 746A - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, at 23°C) ¹¹ 3204 J/m ASTM D4812 Izod Impact (Notched, at 23°C) ¹¹ 747 J/m ASTM D256 Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹ No break kJ/m² ISO 180/1U Instrumented Dart Impact Total Energy (at 23°C) ¹¹ 62 J ASTM D3763 Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹ No break kJ/m² ISO 180/1U Izod Impact (Notched, 80*10*3, at 23°C) ¹¹ 65 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*3, at -30°C) ¹¹ 11 kJ/m² ISO 180/1A Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ 65 kJ/m² ISO 179/1eA Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ 12 kJ/m² ISO 179/1eA Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ No break kJ/m² ISO 179/1eU Charpy Impact (at -30°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ No break kJ/m² ISO 179/1eU - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 120 °C - Drying Time ⁷ 2 - 4 Hrs - Maximum Moisture Content ⁷ 0.02 % - Melt Temperature ⁷ 280 - 300 °C - Nozzle Temperature ⁷ 270 - 290 °C - Front - Zone 3 Temperature ⁷ 280 - 300 °C - Middle - Zone 2 Temperature ⁷ 270 - 290 °C - Rear - Zone 1 Temperature ⁷ 260 - 280 °C - Hopper Temperature ⁷ 60 - 80 °C - Mold Temperature ⁷ 80 - 100 °C - - Flame Characteristics
Value Units Test Method / Conditions UL Recognized (94HB Flame Class Rating) ᵖ min. 0.7 mm UL 94 UV-light (Water exposure/immersion) ᵖ F2 - UL 746C - Note
- ʰ Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability