Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ 60 MPa ASTM D638 Tensile Stress (Break, Type I, 50 mm/min) ¹¹ 60 MPa ASTM D638 Tensile Strain (Yield, Type I, 50 mm/min) ¹¹ 6 % ASTM D638 Tensile Strain (Break, Type I, 50 mm/min) ¹¹ 117 % ASTM D638 Tensile Modulus (at 50 mm/min) ¹¹ 2320 MPa ASTM D638 Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ 96 MPa ASTM D790 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ 2360 MPa ASTM D790 Tensile Stress (Yield, 50 mm/min) ¹¹ 60 MPa ISO 527 Tensile Stress (Break, 50 mm/min) ¹¹ 59 MPa ISO 527 Tensile Strain (Yield, 50 mm/min) ¹¹ 6 % ISO 527 Tensile Strain (Break, 50 mm/min) ¹¹ 115 % ISO 527 Tensile Modulus (at 1 mm/min) ¹¹ 2450 MPa ISO 527 Flexural Stress (Yield, at 2 mm/min) ¹¹ 71 MPa ISO 178 Flexural Modulus (at 2 mm/min) ¹¹ 2310 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Specific Gravity ¹¹ 1.2 - ASTM D792 Mold Shrinkage (flow, 3.2 mm) ʰ ¹¹ 0.4 - 0.8 % SABIC method Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹ 19.5 g/10 min ASTM D1238 Density ¹¹ 1.2 g/cm³ ISO 1183 Water Absorption (at 23°C, saturated) ¹¹ 0.35 % ISO 62-1 Moisture Absorption (at 23°C, 50% RH) ¹¹ 0.15 % ISO 62 Melt Volume Rate (at 220°C, 5.0 kg) ¹¹ 18 cm³/10 min ISO 1133 - Thermal Properties
Value Units Test Method / Conditions Vicat Softening Temperature (Rate B/50) ¹¹ 141 °C ASTM D1525 Vicat Softening Temperature (Rate B/50) ¹¹ 141 °C ISO 306 Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ 128 °C ASTM D648 Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹ 129 °C ASTM D648 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.00006 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.00006 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.00006 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.00006 1/°C ISO 11359-2 Vicat Softening Temperature (Rate B/120) ¹¹ 140 °C ISO 306 Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 122 °C ISO 75/Af - Impact Properties
Value Units Test Method / Conditions Izod Impact (Notched, at 23°C) ¹¹ 828 J/m ASTM D256 Izod Impact (Notched, at -30°C) ¹¹ 242 J/m ASTM D256 Instrumented Dart Impact Total Energy (at 23°C) ¹¹ 72 J ASTM D3763 Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹ No break kJ/m² ISO 180/1U Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹ No break kJ/m² ISO 180/1U Izod Impact (Notched, 80*10*3, at 23°C) ¹¹ 65 kJ/m² ISO 180/1A Izod Impact (Notched, 80*10*3, at -30°C) ¹¹ 11 kJ/m² ISO 180/1A Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ 65 kJ/m² ISO 179/1eA Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ 12 kJ/m² ISO 179/1eA Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ No break kJ/m² ISO 179/1eU Charpy Impact (at -30°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ No break kJ/m² ISO 179/1eU - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 120 °C - Drying Time ⁷ 3 - 4 Hrs - Drying Time (Cumulative) ⁷ 48 Hrs - Maximum Moisture Content ⁷ 0.02 % - Melt Temperature ⁷ 295 - 315 °C - Nozzle Temperature ⁷ 290 - 310 °C - Front - Zone 3 Temperature ⁷ 295 - 315 °C - Middle - Zone 2 Temperature ⁷ 280 - 305 °C - Rear - Zone 1 Temperature ⁷ 270 - 295 °C - Mold Temperature ⁷ 70 - 95 °C - Back Pressure ⁷ 0.3 - 0.7 MPa - Screw Speed ⁷ 40 - 70 rpm - Shot to Cylinder Size ⁷ 40 - 60 % - Vent Depth ⁷ 0.025 - 0.076 mm - - Note
- ʰ Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Packaging & Availability
- Regional Availability