Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Composites End Use
- Applications
- The standard procedure of working with epoxy systems applies to this system. The gelcoat can be applied by brush or by roller.
- It is recommended to have workshop temperature conditions between 18-25°C in order to facilitate the mixing. A lower temperature will increase the viscosity of the mix as well as its pot life. On the contrary, a higher temperature will reduce the viscosity and the pot life of the mix.
Properties
- Color
- Mechanical Properties
Value Units Test Method / Conditions Curing Cycle (60°C) 16.0 - - Hardness 92.0 - Shore D TG 89.0 °C - - Physical Properties
Value Units Test Method / Conditions Density (23°C) 1.75 - - Mix Density (23°C) 1.65 - - Mix Viscosity (23°C) 6 000 mPa.s - Viscosity (23°C) 100 000 mPa.s - - Typical Properties
Value Units Test Method / Conditions Mixing Ratio (by weight) 100/13 - - Pot Life (2mm film at 23°C) 9h - - Pot Life (70mL at 23°C (4cm thickness)) 8h30min - - Tack time (in film at 23°C) 4h30min- 5h30min - - Vertical Sag Limit (23°C) 400.0 μm -
Safety & Health
- Health & Safety
Skin contact must be avoided by wearing pro- tective nitrile gloves & overalls or other protec- tive clothing. Eye protection should be worm to avoid risk of resin or hardener entering the eyes. If this occurs, flush the eye with water for 15 minutes, holding the eyelid open, and seek medical attention. Ensure adequate ventilation in work areas. Respiratory protection should be worn with ABEKP coded filters.
Packaging & Availability
- Packaging Type
- Packaging
Available kits
- 1.13 kg: (1+0.13) kg
- 6.78 kg: (6+0.78) kg
- 33.9 kg: (30+3.9) kg
- 286 kg: (220+3x22) kg
Storage & Handling
- Storage
- Keep containers sealed and away from heat and cold preferably between 10°C and 30°C ina well ventilated area. Our products are guaran teed in their original packaging (check expiry date stated on the label).