Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Features
- Coarse Mesh Polystyrenic Gel
- 8% Crosslinked
- Sodium Form
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Applications
- Softening - Industrial
- Demineralization
- Softening - High Flow Rate
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Polymer Matrix Styrenic Gel - - Ionic Form Sodium - - Fuctional Group Sulfonic Acid - - Particle Size 595 - 1190 μm - % max. 50 mesh (300µm) max. 1 % - Minimum Sphericity 93.0 % - Uniformity Coefficient 1.4 - - Temperature Limit 280.0 °F - Capacity (meq/mL) 2.0 - - Moisture Retention 42 - 49 % - Shipping Weight 51 - 53 lbs/ft³ - Regenerability Yes - - Reversible Swelling (Na to H) 5 - 9 % - - Recommended Operating Conditions
Value Units Test Method / Conditions Maximum Continuous Temperature Sodium Form 280.0 °F - Minimum Bed Depth 24.0 inches - Backwash Expansion 25 - 50 % - Maximum Pressure Loss 25.0 psi - Operating ph Range 0 - 14 - - Regenerant Concentration (Salt Cycle) 10 - 15 % NaCl - Regenerant Level 4 - 15 lbs./cu.ft. - Regenerant Flow Rate 0.5 - 1.5 gpm/cu.ft. - Regenerant Contact Time min. 20 minutes - Displacement Flow Rate Same as dilution water - - Displacement Volume 10 - 15 gallons/cu.ft. - Rinse Flow Rate Same as service flow - - Rinse Volume 35 - 60 gallons/cu.ft. - Service Flow Rate 1 - 10 gpm/cu.ft. -
Regulatory & Compliance
- Certifications
- Kosher Certified
- Halal Certified
Technical Details & Test Data
- Product Technical Data
Capacity and leakage data are based on the following: 2:1 Ca:Mg ratio, 500 ppm TDS as CaCO3, 0.2% hardness in the salt and 10% brine concentration applied co-currently through the resin over 30 minutes. No engineering downgrade has been applied.
