MELOPAS MP 180 - Raschig - Melamine - Injection Molding

Enhanced TDS

Materials Features: Excellent Surface Hardness,
Good Electrical Properties,
Good Mechanical Properties,
Very Good Heat Resistance
Product Characteristics: Wood flour reinforced phenol-modified Melamine molding compound
Excellent surface hardness, good mechanical properties, good electrical properties, good heat resistance
Primary application(s): Molded parts in electrical engineering, mountings for household appliances, car ashtrays
This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95
RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)
Identification according to ISO 14528-1:MP (WD30+MD15) - (WD40+MD05)DIN 7708: MP 180

Markets: Consumer Goods,
Electrical & Electronics
Applications: Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
Consumer Electronics
Consumer Goods — Housewares
Electrical & Electronics — Parts & Components
Other Parts & Components
Plastics & Elastomers End Uses: Appliances,
Electrical Components,
Garden Equipment,
Household Goods,
Lawn Equipment,
Trays
Plastics & Elastomers Processing Methods: Compression Molding,
Injection Molding
Supply form: Low dust granulate in moisture resistant bags
Processing: Injection and compression molding

Flame Rating

UL 94 V0

Physical Form

Granules,

Mechanical Properties


	Value	Units	Test Method / Conditions
Compressive strength	200 - 250	MPa	ISO 604
E-Modulus (flexural test)	7 - 9	GPa	ISO 178
E-Modulus (tensile test)	5 - 8	GPa	ISO 527
Flexural strength	100 - 130	MPa	ISO 178
Impact strength (Charpy)	6 - 9	kJ/m²	ISO 179 / 1eU
Impact strength (Charpy), notched	1,4 - 2,0	kJ/m²	ISO 179 / 1eA
Tensile strength	50 - 70	MPa	ISO 527

Thermal Properties


	Value	Units	Test Method / Conditions
Coeff. of linear thermal expansion (longitudinal,50-100°C)	15 - 35	10-6 / K	ISO 11359-2
Flammability	V-0 / 1,5	Stufe/mm	UL 94
Glow wire flammability test / GWFI	960 / 1	-	IEC60695-2-12
Glow wire ignitability test / GWIT	900 / 1	-	IEC60695 2-13
Heat deflection temp. HDT A - 1,80 MPa	155- 180	°C	ISO 75
Heat deflection temp. HDT C - 8,00 MPa	110 - 130	°C	ISO 75
Maximum application temperature (<50 h)	160	°C	IEC 60216/T1
Maximum application temperature (20 000 h)	135	°C	IEC 60216/T1
Thermal conductivity	0,5 - 0,6	W / m * K	ASTM E 1461

Typical Properties


	Value	Units	Test Method / Conditions
Moulding shrinkage (longitudinal)	0,8 - 1,2	%	ISO 2577
Post shrinkage (168 h / 110 °C)	0,8 - 1,3	%	ISO 2577
Specific gravity	1.50 - 1.60	g/cm³	ISO 1183
Water absorption (24 h / 23 °C)	max. 115 / max. 2,0	mg / %	ISO 62
Apparent Density	0.55 - 0.75	g/cm³	ISO 60

Electrical Properties


	Value	Units	Test Method / Conditions
Tracking resistance (CTI)	≥175	V	IEC 60112
Surface Resistance	10^10 - 10^11	Ohms	IEC 60093
Volume resistivity	10^11 - 10^12	Ω cm	IEC 60093
Arc resistance	5	Stufe	ASTM D 495
Dielectric strength	15 - 20	kV / mm	IEC 60243-1
Dissipation factor (100 Hz/1 MHz)	0,3-0,5 / 0,03-0,05	-	IEC 60250
Relative permittivity (100 Hz/1 MHz)	11 - 16 / 7 - 9	-	IEC 60250

Certifications & Compliance: PFOS - 2006/122/EC,
RoHS Compliant,
UL 94,
Waste Electrical & Electronic Equipment Directive (WEEE)

Storage conditions / shelf life: Keep cool and dry.Minimum shelf life at 20 ± 5 °C:6 months after date of delivery