Rainmaker Polymers ACLLCC80NA1

Rainmaker Polymers ACLLCC80NA1 is 80% Calcium Polyethylene. Antiblock concentrates incorporate inorganic components that microscopically "roughen" the surface of blown and cast films. These roughened surfaces minimize the surface contact area between the films and decrease the tendency of these surfaces to adhere to one another.

Functions: Anti-Blocking Agent

Processing Methods: Extrusion, Film Extrusion

Carrier: Linear Low Density Polyethylene (LLDPE), Resin-based

Technical Data Sheet Safety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Carrier: Linear Low Density Polyethylene (LLDPE),
Resin-based
Chemical Family: Calcium Salts,
Carbonates
Chemical Name: Calcium Carbonate
Plastics & Elastomers Functions: Anti-Blocking Agent
CAS No.: 471-34-1
EC No.: 207-439-9
Technologies: Plastics
Product Families: Plastics — Masterbatches
Additive Masterbatches
Plastics — Polymer Additives
Surface Modifiers
Additive Type: Calcium Carbonate

Features & Benefits

Product Highlights

Film grade dispersion
Reduced cycle time/increases line speeds
Savings in raw material costs

Applications & Uses

Markets: Printing & Packaging
Applications: Printing & Packaging — Packaging
Food & Beverage Packaging
Plastics & Elastomers End Uses: Cast Films,
Film
Plastics & Elastomers Processing Methods: Extrusion,
Film Extrusion

Properties

Physical Form

Carrier Resin Data


	Value	Units	Test Method / Conditions
Density	0.924	g/cm³	ASTM D792
Melt Flow	20	g/10 min	ASTM D1238
Type	LLDPE	-	-

Concentrate Data


	Value	Units	Test Method / Conditions
Additive Loading	80	%	Internal
Melt Flow	7	g/10 min	ASTM D1238
Pellet Weight	30	pellets/gm	Internal

Regulatory & Compliance

Certifications & Compliance

Coalition of Northeastern Governors (CONEG),

FDA 21 CFR 174.5,

FDA 21 CFR 177.1520,

FDA 21 CFR 178.2010,

FDA 21 CFR 178.3297

Chemical Inventories

Regulatory Data

FDA: The components in this product comply with the following sections of Title 21, Code of Federal Regulations (21CFR):
- 174.5 178.2010
- 177.1520 178.3297
CONEG: The components of this product are compliant with the current requirements issued by the Coalition of North Eastern Governors (CONEG) requiring less than 100 PPM total in the final product packaging.