BoraSol-WP® Plus

• Inexpensive - adds less than 2% to the cost of the home
• Lifetime residential limited warranty
• Easy to work with as it inhibits corrosion and requires no special fasteners

Mold grows on wood within 48 hours of getting wet

• Condensation from HVAC system
• Excessive humidity in basements or attics
• Leaking basements
• Unventilated crawl spaces
• Sprinkler systems that spray on foundations

• For Wood usage above ground. Solutions can range from 0.1% to 0.3% depending on the level of protection required. A one minute dip at 0.1% dip at ambient temperatures should be adequate for control of fungal organisms to the lumber. For freshly sawn lumber, a 1% solution is recommended. For millwork a solution of 0.25% to 2.0% is suggested.
• Do not use on wood surfaces that will come in contact with food. Surfaces which may be in continuous contact with skin should be coated with a varnish or lacquer after treatment with this product. Wood protective stains will require 1.0 to 4.0% levels of this product.
• Wood treated with B-WP Plus does not change surface colors. This product may be applied by Dipping, Brushing or (low pressure) Spraying.
• B-WP Plus can be added to stains for exterior siding in order to prevent fungal growths. Use a 1-4% by weight of the final formulation.