Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Typical Applications
ES6279, ES6271 and ES6272 are excellent adhesives for all types of bonding applications. They are very versatile, and can bond a wide variety of materials, so the material becomes a very effective tool in general shop situations. Often, ES6279 will outperform other supposed high performance materials, and give handling advantages as well. It has been successfully used for many years in a variety of general bonding uses, as well as, numerous production applications.
- Directions For Use
PREPARATION: All surfaces to be bonded or patched must be free of dirt, oil and grease. Sanding or roughening the area to be bonded increases the surface area and enhances the bond.
MIXING: Measure out equal parts of ES6279 A and B, combine, and mix thoroughly until a uniform color and consistency is reached. Mix for at least 1 to 2 minutes, scraping the sides and bottom of the container to avoid leaving unmixed material that will cause soft spots in the cured material.
APPLICATION and CURING: Apply mixed material to roughened area of the parts to be bonded. Press surfaces firmly together and let set 1 to 2 hours at 75°F. If necessary, place assembly in a jig or other device to prevent movement during initial curing time. Curing time is 6 to 8 hours at 75° F, or 50 to 60 minutes at 140°F. The bonded object can be put into light service at this time, however, for maximum strength, wait 24 hours. The material to be bonded may be preheated to accelerate curing time, or very light heat can be applied after the parts have been bonded
Properties
- Color
- Physical Form
- Mechanical Properties
Value Units Test Method / Conditions Mix Ratio (By Weight ) 100 : 100 Wt. PTM&W Mixed Viscosity Smooth Paste cps D2393 Pot Life (4 fl. Oz. Mass At 77°F) 20 - 30 min. D2471 Cured Hardness 90 Shore D D2240 Cure Time (77°F) 8-Jun h PTM&W Cure Time (140°F) 45 - 60 h PTM&W Specific Gravity 1.51 - D1475 Tensile Strength 7200 psi D638 Elongation At Break 6 % D638 Compressive Strength 14300 psi D695 Operating Temperature -50°F - 150°F °F PTM&W Aluminum to Aluminum Tensile Lap Shear (77°F) 3400 psi D1002 Aluminum to Aluminum Tensile Lap Shear (140°F) 2000 psi D1002 Water Absorption max. 2 % D570
Safety & Health
- Safety And Handling
PTM&W epoxy products are made from raw materials carefully chosen to minimize or even eliminate toxic chemicals, and therefore offer the user high performance products with minimum hazard potential when properly used. Generally, the PTM&W epoxy resins and hardeners will present no handling problems if users exercise care to protect the skin and eyes, and if good ventilation is provided in the work areas. However, breathing of mist or vapors may cause allergenic respiratory reaction, especially in highly sensitive individuals. As such, avoid contact with eyes and skin, and avoid breathing vapors. Wear protective rubber apron, clothing, nitrile rubber gloves, face shield or other items as required to prevent contact with the skin. In case of skin contact, immediately wash with soap and water, followed by a rinse of the area with vinegar, and then a further wash with soap and water. The vinegar will neutralize the hardener and lessen the chances of long term effects. Use goggles, a face shield, safety glasses or other items as required to prevent contact with the eyes. If material gets into the eyes, immediately flush with water for at least 15 minutes and call a physician. Generally, keep the work area as uncluttered and clean as possible, and clean up any minor spills immediately to prevent accidental skin contact at a later time. Keep tools clean and properly stored. Dispose of trash and empty containers properly
Packaging & Availability
- Packaging Weights
Quart Kit Gallon Kit Pail Kit ES6279, 71 & 72 Part A 3 lb. 12 lb. 60 lb. ES6279, 71 & 72 Part B 3 lb. 12 lb. 60 lb. Kit 6 lb. 24 lb. 120 lb.