Products

Polytech® Vinyl Nitrile Foam (PVN-F41) is a vinyl/nitrile/neoprene closed cell foam is designed for use as a gasket or seal in a variety of environments. It offers excellent resistance to gasoline and other aliphatic hydrocarbons.

Polydamp® J2 Adhesive Backing (PSA) is a high-performance copolymer cross-linking unsupported, acrylic pressure-sensitive adhesives. They exhibit moderately aggressive tack, high peel and shear and excellent heat resistance. In addition, they have good chemical and plasticizer resistance, as well as excellent long-term aging and the ability to withstand environmental extremes.

Polydamp® J4 Adhesive Backing (PSA) is a high-performance copolymer cross-linking unsupported, acrylic pressure-sensitive adhesives. They exhibit moderately aggressive tack, high peel and shear and excellent heat resistance. In addition, they have good chemical and plasticizer resistance, as well as excellent long-term aging and the ability to withstand environmental extremes.

POLYDAMP® Low Permeability Foam (LP-18) is a soft, ether-based polyurethane foam with low permeability but quick recovery. It is an excellent low-cost alternative to traditional closed cell foams in applications where moisture and air need to be retained.

Polydamp® L4 Adhesive Backing (PSA) is a high performance unsupported acrylic pressure sensitive adhesive exhibiting moderate tack and good peel and shear. It has good chemical resistance as well as excellent long term aging and the ability to withstand environmental extremes.

POLYTECH® High-Density Polyurethane Foam Grade (PHU) is a low modulus open cell polyurethane foam. It behaves like a closed cell foam product when compressed and is an excellent gasket seal. This material has a significantly lower compression set than typical closed cell foam gaskets.

Polydamp® P4 Adhesive Backing (PSA) is a high performance unsupported acrylic pressure sensitive adhesive exhibiting aggressive tack, high peel and shear, and good heat resistance. In addition, it has good chemical and plasticizer resistance as well as excellent long term aging and the ability to withstand environmental extremes.

POLYTECH® Silicone Foam grade 800 or 1000 (PSL)is a soft cellular silicone foam that is extremely resilient to mechanical fatigue and has high compression set resistance. It also has Excellent Flame Spread and Smoke Density values.

POLYTECH® Neoprene Blend Foam (PNB-F41) is a Neoprene/EPDM/SBR closed cell blend foam with good resistance to weather, oxidation, and ozone. This is an economical closed cell foam for a variety of uses.

Polydamp® Q2 Adhesive Backing (PSA) is a high performance supported pressure sensitive adhesive designed to bond to irregular as well as flat surfaces. This adhesive bonds well to many surfaces including foams, metals and most low surface energy plastics.

Polydamp® FR3 Adhesive Backing (PSA) is a fire-retardant acrylic PSA exhibiting good tack and sheer properties with moderate peel values. It has good chemical and plasticizer resistance, as well as excellent long-term aging and moderate heat resistance. This adhesive is well suited for use with other highly fire-retardant materials such as Polydamp® Melamine Foam (PMF), Polydamp® Hydrophobic Melamine Foam (PHM), and Polydamp® Polyimide Foam (PPF).