Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Reinforcement Material
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
Injection Molding
- Filler and Reinforcement
- Filler : Glass Fiber
- Reinforcement : 20% Filler by Weight
Features & Benefits
- Materials Features
- Features
Foamable
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Uses
Foam
Properties
- Physical Form
- Physical Properties
Value Units Test Method / Conditions Density 1.35 - ASTM D792 Melt Mass Flow Rate (at 300°C, 1.2 kg) 4.0 - 10 g/10 min ASTM D1238 Molding Shrinkage (at 0.125 in, Flow) 1.0E-3 to 4.0E-3 in/in ASTM D955 Specific Gravity 1.35 - ASTM D792 - Mechanical Properties
Value Units Test Method / Conditions Tensile Strength (at Yield, 0.125 in) 17000 psi ASTM D638 Tensile Strength (at Break, 0.125 in) 17000 psi ASTM D638 Flexural Modulus (at 0.125 in) 750000 psi ASTM D790 Flexural Strength (at 0.125 in) 18000 psi ASTM D790 - Thermal Properties
Value Units Test Method / Conditions Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) 300 °F ASTM D648 Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) 285 °F ASTM D648 - Processing Information (Injection Molding)
Value Units Test Method / Conditions Drying Temperature 250 - 265 °F - Drying Time 3.0 - 4.0 hr - Front Temperature 600 - 640 °F - Middle Temperature 580 - 620 °F - Mold Temperature 180 - 240 °F - Maximum Drying Time 8 hr - Processing Temperature (Melt) 575 - 625 °F - Rear Temperature 560 - 600 °F - - Impact Properties
Value Units Test Method / Conditions Impact Strength (at 73°F, 0.125 in, Notched Izod) 1.5 ft·lb/in ASTM D256
Regulatory & Compliance
- Certifications & Compliance
- Agency Ratings & Compliance
RoHS Compliant