Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
Injection Molding
- Additive
Flame Retardant
Features & Benefits
- Labeling Claims
- Materials Features
- Features
- Bromine Free
- Chlorine Free
- Flame Retardant
- High Flow
- High Impact Resistance
- Self Extinguishing
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Physical Properties
Value Units Test Method / Conditions Density 1.18 - ASTM D792 Melt Mass Flow Rate (at 250°C, 5 kg) 40 - 60 g/10 min ASTM D1238 Molding Shrinkage (at 0.125 in, Flow) 4.0E-3 to 6.0E-3 in/in ASTM D955 Specific Gravity 1.18 - ASTM D792 - Mechanical Properties
Value Units Test Method / Conditions Tensile Strength (at Yield, 0.125 in) 8800 psi ASTM D638 Tensile Strength (at Break, 0.125 in) 8000 psi ASTM D638 Flexural Modulus (at 0.125 in) 370000 psi ASTM D790 Flexural Strength (at 0.125 in) 13500 psi ASTM D790 - Thermal Properties
Value Units Test Method / Conditions Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) 185 °F ASTM D648 Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) 175 °F ASTM D648 Relative Thermal Index Electrical Property (at 0.06 in) 140 °F UL 746 Relative Thermal Index Electrical Property (at 0.12 in) 140 °F UL 746 Relative Thermal Index Impact Property (at 0.06 in) 140 °F UL 746 Relative Thermal Index Impact Property (at 0.12 in) 140 °F UL 746 Relative Thermal Index Strength Property (at 0.06 in) 140 °F UL 746 Relative Thermal Index Strength Property (at 0.12 in) 140 °F UL 746 - Flammability
Value Units Test Method / Conditions Flame Rating (at 0.06 in) V-0 - UL 94 Flame Rating (at 0.12 in) V-0 - UL 94 - Processing Information (Injection Molding)
Value Units Test Method / Conditions Drying Temperature 170 - 180 °F - Drying Time 3.0 - 4.0 hr - Front Temperature 470 - 530 °F - Middle Temperature 450 - 510 °F - Mold Temperature 140 - 180 °F - Rear Temperature 430 - 490 °F - Maximum Drying Time 8 hr - Processing Temperature (Melt) 475 - 525 °F - - Impact Properties
Value Units Test Method / Conditions Impact Strength (at 73°F, 0.125 in, Notched Izod) 10 ft·lb/in ASTM D256 Gardner Impact Strength (at 0.125 in) 320 in·lb ASTM D3029
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Agency Ratings & Compliance
RoHS Compliant