Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
Injection Molding
- Filler and Reinforcement
- Filler : Glass Fiber
- Reinforcement : 20% Filler by Weight
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Physical Properties
Value Units Test Method / Conditions Density 1.19 - ASTM D792 Melt Mass Flow Rate (at 230°C, 3.8 kg) 0.10 - 5.0 g/10 min ASTM D1238 Molding Shrinkage (at 0.125 in, Flow) 1.0E-3 to 3.0E-3 in/in ASTM D955 Specific Gravity 1.19 - ASTM D792 - Mechanical Properties
Value Units Test Method / Conditions Tensile Modulus (at 0.125 in) 650000 psi ASTM D638 Tensile Strength (at Yield, 0.125 in) 10000 psi ASTM D638 Tensile Strength (at Break, 0.125 in) 10000 psi ASTM D638 Tensile Elongation (at Yield, 0.125 in) 2 % ASTM D638 Flexural Modulus (at 0.125 in) 750000 psi ASTM D790 Flexural Strength (at 0.125 in) 15500 psi ASTM D790 - Thermal Properties
Value Units Test Method / Conditions Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) 225 °F ASTM D648 Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) 213 °F ASTM D648 - Processing Information (Injection Molding)
Value Units Test Method / Conditions Drying Temperature 175 - 185 °F - Drying Time 3.0 - 4.0 hr - Front Temperature 410 - 440 °F - Middle Temperature 410 - 430 °F - Mold Temperature 120 - 140 °F - Maximum Drying Time 8 hr - Rear Temperature 375 - 390 °F - Processing Temperature (Melt) 410 - 460 °F - - Impact Properties
Value Units Test Method / Conditions Impact Strength (at 73°F, 0.125 in, Notched Izod) 1 ft·lb/in ASTM D256 Impact Strength (at 73°F, 0.125 in, Unnotched Izod) 5 ft·lb/in ASTM D4812
Regulatory & Compliance
- Certifications & Compliance
- Agency Ratings & Compliance
RoHS Compliant