Polygem Sinmast 501 - Flexible Coating

• Easy mixing & pouring
• Self leveling or gel formulas
• Bonds to damp surfaces
• Excellent chemical and solvent resistance
• Non-shrinking

• Joint and crack sealing and repair
• Flexible Membrane Coating
• Swimming Pools and Waterslides
• Waterproofing Membrane

1. Clean surface by sand blasting or grinding to provide clean and open surface.
2. Thoroughly mix measured amounts of 1 part of Part-A Resin with 1 part of Part-B Hardener by volume until streak free.
3. Pour Sinmast #501 into joint flush to surface.

   ---

    

• Scrape side and bottom of pail frequently during mixing to insure a good mix.
• Mix only enough that can be applied in 45 minutes.

Excess material can be removed with a razor knife after 3-4 hours of cure.

For Membrane Coating: 

1. Spread mixed epoxy with a notched squeegee and back roll with a 3/8” nap roller to desired coating mil thickness.

• Broadcast silica sand into wet coating for additional abrasion resistance or aluminum oxide into wet coating for skid resistance if required.