PEROXAN ME-50 LA3 X

PEROXAN ME-50 LA3 X is used for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators. PEROXAN ME-50 LA3 X gives in comparison with most other ketone peroxides a significantly longer gel time and is therefore particularly suitable for those applications where a longer gel time or production time is required, for instance in the production of large parts or in filament winding. PEROXAN ME-50 LA3 X is especially recommended for the cure of vinylester resins. This MEKP formulation gives less \foaming\" than standard MEKPs. Depending on working conditions, the following peroxide and accelerator dosage levels are recommended: PEROXAN ME-50 LA3 X: 1,0 to 4,0 phr PERGAQUICK C12 X (Cobalt, 1%): 0,5 to 3,0 phr"

• Maximum storage temperature (Ts max) : 30°C
• Minimum storage temperature (Ts min) : 0°C
• Storage stability as from date of delivery : 6 months
• Keep packaging tightly closed in a well ventilated place at indicated storage temperature. Keep away from reducing agents e.g. amines, acids, alkalis, heavy metal compounds (e.g. accelerators, driers, metal soaps). Never weigh out in storage room. Oxidizing agent. Decomposes violently under the influence of heat or by contact with reducing agent. Never mix with accelerators.
• Please refer to the material safety data sheet (MSDS) for information concerning safe storage, use and handling of PEROXAN ME-50 LA3 X.