PEROXAN BP-Pulver 20

PEROXAN BP-Pulver 20 is used for the curing of highly filled, unsaturated polyester resins at ambient and elevated temperatures. At temperatures up to 80°C, PEROXAN BP-Pulver 20 should be used in combination with a tertiary amine accelerator, above 80°C the use of an accelerator is not required. PEROXAN BP-Pulver 20 is easy to handle, easy to disperse and dissolves quickly in unsaturated polyester resins. The curing system PEROXAN BP-Pulver 20 in combination with an amine accelerator shows a very fast cure that is hardly influenced by humidity and fillers. Even at low temperatures a relatively good cure will be obtained. A disadvantage may be the yellow color and poor light resistance of the molded product. For ambient temperature curing the following amine accelerators are available to adjust the gel time and speed of cure of the cure system based on PEROXAN BP-Pulver 20: PERGAQUICK A100 (N,N-Dimethyl-p-toluidine) for short gel times PERGAQUICK A150 PM (Ethoxylates of p-toluidine) for short to medium gel times PERGAQUICK A200 (N,N-Dimethylaniline) for medium gel times PERGAQUICK A300 (N,N-Diethylaniline) for long gel times Depending on working conditions the following peroxide and accelerator dosage levels are recommended: PEROXAN BP-Pulver 20: 5 to 12,5 phr Amine accelerator: 0,05 to 0,5 phr

• 25kg cardboard box

• Maximum storage temperature (Ts max) : 30°C
• Storage stability as from date of delivery : 6 months
• Keep packaging tightly closed in a well ventilated place at indicated storage temperature. Keep away from reducing agents e.g. amines, acids, alkalis, heavy metal compounds (e.g. accelerators, driers, metal soaps). Never weigh out in storage room. Oxidizing agent. Decomposes violently under the influence of heat or by contact with reducing agent. Never mix with accelerators.
• Please refer to the material safety data sheet (MSDS) for information concerning safe storage, use and handling of PEROXAN BP-Pulver 20.