PEROXAN BD-Paste 50 SI

PEROXAN BD-Paste 50 SI is recommended for the crosslinking of silicone rubber. With PEROXAN BD-Paste 50 SI silicone rubber compounds can be cured without external pressure (hot air and/or IR vulcanization). PEROXAN BD-Paste 50 Si can be incorporated easily into a silicone rubber compound on a 2-roll mill. Dosing (silicone rubber): 1,1 to 2,3 phr Safe processing temperature (t2): 75°C Typical crosslinking temperature (t90): 90°C The safe processing temperature t2 is defined as the temperature, at which the scorch time is longer than 20 minutes. The typical crosslinking temperature t90 is defined as the temperature at which 90% of the crosslinks in the compound are formed within about 12 minutes.

• 20kg pail

• Maximum storage temperature (Ts max) : 30°C
• Minimum storage temperature (Ts min) : 5°C
• Storage stability as from date of delivery : 6 months
• Organic Peroxides are more or less stable products but will decompose under the influence of heat. To minimize a loss of quality during storage, it is important that the recommended maximum storage temperature is not exceeded. If a minimum storage temperature is given, an undesirable process such as a solidification or phase separation, is known to occur below this temperature.
• Please refer to the material safety data sheet (MSDS) for information concerning safe storage, use and handling of PEROXAN BD-Paste 50 SI.