Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- WATERTITE WS produces, upon curing, a tough, seamless membrane which is virtually unaffected by water, ice, salt, fuel oil and acids.
- WATERTITE WS has excellent adhesion to concrete and metal. As a component of the WATERTITE TDS System it shows excellent compatibility and intercoat adhesion to WATERTITE WS LV and PENNSEALER EE.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Uses
Typical uses include Garage Decks, Pedestrian Walk-ways and Decks, Balconies, Mechanical Rooms and Industrial Floors.
- Limitations
WATERTITE WS is not to be applied to surfaces which have loose material, dust, dirt, grease, oil or water.
- Applications
The two components should be thoroughly mixed with a double blade agitor attached to a low speed drill for a period of not less than 7 minutes. Important: improper mixing will not allow the material to cure properly. Watertite ws may be applied with a trowel or a squeegee. When applied at the rate of 1 sq.M/l (50 sq.Ft./gal) an approximate 1 mm (40 mils) dry thickness is achieved.
- Pot Life
After activation, 45 minutes at 70ºF.
- Caution
Fresh, unmixed WEAR SURFACE resin compound contains xylene, a volatile and flammable solvent. Once activator has been mixed with resin, product will proceed to cure and cannot be stored and reused.
Properties
- Typical Properties
Value Units Test Method / Conditions Solids By Volume min. 86 % - Tensile Strength 1220.0 psi ASTM D412 Abrasion Loss (Tabor) 30.0 mg ASTM C50-1, Wheel CS-17 Elongation At Break 140.0 % ASTM D412 Hardness 8.0 shore A - Water Vapour Transmission 0.70 x 10⁻² metric perms ASTM E96 Storage Temperature -30 to 155 ºF - Coverage (1 Mm Approximate Dry Thickness) 1.0 sq.m/litre - - Properties
- Environmental resistance Excellent: Ozone, extreme temperatures, industrial pollutants.
- Poor: Ultraviolet light - Direct exposure of all colors except black will result in gradual color change to green overtone.
- Chemical resistance Excellent: Fuel oils, most acids, alkalai, salts, fungi, bacteria
- Cure time Pedestrian traffic in 4 to 8 hours. Vehicular traffic in 24 hours. Total cure in 5 days.
Packaging & Availability
- Packaging & Availability
- WATERTITE WS is available in different colors and could be suitably finished and/or textured with different size and type of aggregate for particular end use.
- Available Colors - Black, Tan, Gray.
- WATERTITE WS is packaged in 19 liter (4 gallon) volume proportioned in 22.7 liter (5 gallon) container with activator in 4.54 liter (1 gallon) can.
Storage & Handling
- Shelf Life
Unmixed and unopened, two years.