Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Composition
- Urethane Methacrylate
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Applications
- Ideal to fill gaps up to 0.25 mm (0.01”) diameter clearance.
- Maximum strength at room temperature.
- Used for locking bushings and sleeves into housings and on shafts.
- Excellent retaining, sealing and thread locking compound.
- Directions for use
For Assembly
- For best results, clean all surfaces (external and internal) with a cleaning solvent and allow solvent to evaporate.
- If the material is an inactive metal or the cure speed is to0 slow, spray with Activator 3071 or 3049 and allow to dry.
- For Slip Fitted Assemblies, apply adhesive around the leading edge of the pin and the inside of the collar and use a rotating motion during assembly to ensure good coverage.
- For Press Fitted Assemblies, apply adhesive thoroughly to both bond surfaces and assemble at high press on rates.
- For Shrink Fitted Assemblies the adhesive should be coated onto the pin, the collar should then be heated to create sufficient clearance for free assembly.
- Parts should not be disturbed until sufficient handling strength is achieved.
For Disassembly
- Apply localized heat to the assembly to approximately 250°C. Disassemble while hot.
Properties
- Physical Properties
Value Units Test Method / Conditions Coefficient of Thermal Expansion 80×10^-6 K-1 ASTM D 696 Coefficient of Thermal Conductivity 0.1 W/(m·K) ASTM C 177 Specific Heat 0.3 kJ/(kg·K) - - Cured Properties
Value Units Test Method / Conditions Handling Cure Time 5 min - Functional Cure Time 3-Jan h - Full Cure Time 24 h - Compressive Shear Strength (After 24 hours at 22°C,Steel Pins & Collars) (min. 25) min. 4300 (N/mm2)psi ISO 10123 Compressive Shear Strength (After 30 minutes at 22°C,Steel Pins & Collars) (15 - 17) 2250 (N/mm2)psi ISO 10123 Temperature Range -55 to 150 °C - - Adhesive Properties
Value Units Test Method / Conditions Viscosity (25°C, Brookfield RVT Spindle 4 at 25 rpm) 2500 cps - Specific Gravity 1.09 - - Maximum Diameter of Thread/Gap Filling 0.25 mm - Flash Point min. 93 °C - Solvent Content None - -
Regulatory & Compliance
- Certifications & Compliance
- Certification
WRAS Certified
Technical Details & Test Data
- Chemical Resistance
Chemical Temperature % Initial Strength Retained
500 hours 1000 hours Acetone 22°C 100 100 Ethanol 22°C 100 100 Motor Oil 125°C 100 100 Gasoline 22°C 100 100 Brake Fluid 22°C 100 100 Water/Glycol 87°C 100 95
Packaging & Availability
- Packing
- 10 ml
- 50 ml
- 250 ml
- 1 liter
- 10 liter
Storage & Handling
- Shelf Life
- 1 year
- Storage
Anaerobic adhesives shall be ideally stored in a cool, dry place in unopened containers at a room temperature between 46°F to 82°F. Please do not return any unused material to its original container.