Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Paradigm Labs Defoamer 019-B

Paradigm Labs Defoamer 019-B was developed for use in textile wet processing, including pad, jig, boil-off, scouring, dyeing, finishing, and printing operations. It shows excellent foam knockdown, even in low concentrations and performs well in extended runs. It is stable over a wide range of pH values as well as temperature changes.

Functions: Defoamer

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

CASE Ingredients Functions
Defoamer
Industrial Additives Functions
Defoamer
Technologies
CASE Ingredients,
Industrial Additives & Materials
Product Families
CASE Ingredients — Additives
Foam Control
Industrial Additives & Materials — Textile & Leather Chemicals
Finishing Additives & Treatments

Features & Benefits

Ionic Type
Nonionic, low silicone

Applications & Uses

Markets
Industrial,
Printing & Packaging
Applications
Industrial — Leather & Textiles
Textile Manufacturing
Printing & Packaging — Other Printing & Packaging Applications
Applicable Processes
Textile Dyeing
Industrial Additives End Use
Textiles
Applications

DEFOAMER 019-B is most effective in controlling foam in aqueous systems. Concentrations of 0.25% to 0.5% based on the total mixture are suggested as a start, but often lower amounts are found to give the required defoaming action. Should it be necessary, depending upon the process, small amounts of DEFOAMER 019-B may be added at various time intervals throughout the processing period rather than add the full amount at the start of the process.

Properties

Physical Form
Emulsion,
Liquid
Odor
Mild to odorless
Dispersible in
Water
Physical Properties
ValueUnitsTest Method / Conditions
Pounds/Gallon8.17--
pH (2% solution)8.0 ± 0.5--

Safety & Health

Precautions

May cause eye and skin irritation. Avoid breathing vapor or mist. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

  • Eye contact check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention immediately.
  • Skin contact in case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention immediately.
  • Inhalation move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Get medical attention if adverse health effects persist or are severe.
  • Ingestion wash out mouth with water. Move exposed person to fresh air. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person.

Packaging & Availability

Packaging

15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote

Storage & Handling

Stability
Stable (under normal storage)
Stability on Heating
Stable up to the boil
Stability on Freezing
Permanent separation may occur