Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Foam Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Benefits
A wide spectrum of densities and colors
• Fine, uniform, closed-cell structure
• Pleasant texture and attractive appearance
• High resistance to wear and tear
• Temperature resistance between -60°C and +90°C
• Easy processing and conversion
• Can be thermoformed, vacuum formed, milled (CNC), laminated, glued, die-cut, split, but welded etc
• Can be combined with other foams, films, polymers and textiles by lamination or adhesion- Features
- Thermal insulation.
- Acoustic insulation.
- Durability.
- Resistance to harsh climates.
- Resistance to chemicals and fluids.
- Shock absorption.
- Light weight.
- Processing is easy and convenient.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
Properties
- Typical Properties
Value Units Test Method / Conditions Compression (10%) 41.0 kPa ISO 844 Compression (25%) 67.0 kPa ISO 844 Compression (50%) 140.0 kPa ISO 844 Compression Set (25% 24H) 4.0 % ISO 1856 Compression Set (25%, 0.5H) 12.0 % ISO 1856 Compression Set (50% 0.5H) 39.0 % ISO 1856 Compression Set (50% 24H) 22.0 % ISO 1856 Density 50.0 Kg/m3 ISO 845 Elongation (MD) 124.0 % ISO 1798 Elongation (TD) 139.0 % ISO 1798 Flammbility 40.0 mm/min FMVSS302 Tensile Strength (MD) 485.0 kPa ISO 1798 Tensile Strength (TD) 393.0 kPa ISO 1798 Thermal Conductivity (10°C) 0.038 W/mK ASTM C177 Thermal Conductivity (40°C) 0.042 W/mK ASTM C177 Water Absorption Volume max. 1 % Internal Water Vapour Transmission 1.05 g/m2*24h ISO 1663 Working Temperature Range -60 - 90 °C Internal Width max. 1800 mm - Extruded Thickness 4 - 12 mm - - Product Information
Galfoam is closed cell cross-linked polyethylene foam sheet, produced in an extrusion process.
- WRAS approved for cold water use.
- Dimensional stability 24 hr at 70C < 2%.
- If pinholes were created during the foaming process, no more than 6 holes of diameter 2mm per 1m2 of sheet are acceptable.
- MD - machine direction - along the extruder's axis.
- TD - transverse direction - Perpendicular to the extruder's axis.
- Data represents typical values measured on a 10 mm thick specimen and should be considered as a guideline only.