Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Compatible Substrates & Surfaces
- Applications
Because of the thick gel consistency, it works especially well in poor fitting applications such as rough metal or ceramic repair, unfinished metal to metal bonding, and metal to rubber.
Properties
- Color
- Appearance
- Clear hard (Cured), Clear white gel
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
Value Units Test Method / Conditions Base Compound (Resin) Ethyl cyanoacrylate - - Viscosity Not applicable-thixotropic gel - - Specific Gravity 1.05 - - Flash Point 170 - 200 °F Tagliabue closed cup - Typical Properties
Value Units Test Method / Conditions Average Set Time (Full Cure 24 hours, Metal) 30 - 60 seconds - Average Set Time (Full Cure 24 Hours, Plastic) 20 - 40 seconds - Average Set Time (Full Cure 24 Hours, Rubber) 5 - 10 seconds - Average Strength (Steel) 22.0 N/mm² - Loctite® Equivalent 409.0 - - Permabond® Equivalent 2010.0 - - - Cured Properties
Value Units Test Method / Conditions Softening Temperature 300 °F - Service Temperature -65 to 180 °F - Hardness Barcol 65 - - Dielectric Constant (at 1 MHz) 3.33 - - Specific Resistance 8.6x10² Ω-cm - Tensile Shear Strength 3200 psi - Gap Filling 0.029 inches -
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 20 to 30 seconds Steel to Steel 30 to 60 seconds Phenolic to Phenolic < 90 seconds Polycarbonate to Polycarbonate 20 to 45 seconds Rubber to Rubber 5 to 20 seconds
Storage & Handling
- Shelf Life
- 1 Year