Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Compatible Substrates & Surfaces
- Applications
Because of the 100 viscosity, it works especially well in close to medium fitting applications such as unfinished metal to metal bonding, metal to rubber, and rubber to rubber, such as "O" ring repair/manufacture. This product is a very good, easy to handle general purpose adhesive.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Base Compound (Resin) | Ethyl cyanoacrylate | - | - |
| Viscosity | 90 to 110 | cPs | - |
| Specific Gravity | 1.05 | - | - |
| Flash Point | 170 - 200 | °F | Tagliabue closed cup |
| Value | Units | Test Method / Conditions | |
| Average Set Time (Full Cure 24 hours, Metal) | 20 - 50 | seconds | - |
| Average Set Time (Full Cure 24 Hours, Plastic) | 15 - 30 | seconds | - |
| Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds | - |
| Average Strength (Steel) | 22.0 | N/mm² | - |
| Loctite® Equivalent | 435.0 | - | - |
| Permabond® Equivalent | 731.0 | - | - |
| Value | Units | Test Method / Conditions | |
| Softening Temperature | 300 | °F | - |
| Service Temperature | -65 to 180 | °F | - |
| Hardness Barcol | 65 | - | - |
| Dielectric Constant (at 1 MHz) | 3.33 | - | - |
| Specific Resistance | 8.6x10² | Ω-cm | - |
| Tensile Shear Strength | 2500 | psi | - |
| Gap Filling | 0.005 | inches | - |
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 5 to 10 seconds Steel to Steel 10 to 30 seconds Phenolic to Phenolic 5 to 10 seconds Polycarbonate to Polycarbonate 5 to 15 seconds Rubber to Rubber < 5 seconds
Storage & Handling
- Shelf Life
- 1 Year