Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Applications
Because of TurboFuse 110 Series low viscosity, it works especially well in close fitting applications such as metal to metal bonding, and rubber to rubber such as "O" ring repair/manufacture.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
Value Units Test Method / Conditions Base Compound (Resin) Ethyl cyanoacrylate - - Viscosity 2 to 5 cPs - Specific Gravity 1.05 - - Flash Point 170 - 200 °F Tagliabue closed cup - Typical Properties
Value Units Test Method / Conditions Average Set Time (Full Cure 24 hours, Metal) 5 - 10 seconds - Average Set Time (Full Cure 24 Hours, Plastic) 5 - 10 seconds - Average Set Time (Full Cure 24 Hours, Rubber) 2 - 5 seconds - Average Strength (Steel) 21.0 N/mm² - Loctite® Equivalent 420.0 - - Permabond® Equivalent 101.0 - - - Cured Properties
Value Units Test Method / Conditions Softening Temperature 300 °F - Service Temperature -65 to 180 °F - Hardness Barcol 65 - - Dielectric Constant (at 1 MHz) 3.33 - - Specific Resistance 8.6x10² Ω-cm - Gap Filling 0.002 inches -
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 3 to 5 seconds Steel to Steel 5 to 15 seconds Phenolic to Phenolic 3 to 5 seconds Polycarbonate to Polycarbonate 3 to 10 seconds Rubber to Rubber < 3 seconds
Storage & Handling
- Shelf Life
- 1 Year