CLARUS PAVEMENT MARKINGS™ FS

Solvent free, 100 % solids
Resistant to chemicals
Excellent adhesion to concrete and asphalt
Excellent wetting and bonding capability to substrate and reflective media
Suitable for manual applications of symbols and where continuous run is impractical

May be used for reflectorized pavement markings on asphalt, concrete and other surfaces along with reflective media. Can be used for new construction and maintenance with adequate surface preparation and as per specifications.

Clean to remove contaminants such as water, loose residual from grinding etc. Remove lose debris by vacuum or blow with dry compressed air. For best results, old markings and contaminants should be removed using scarification or grinding.

Mechanical: Volumetric, positive displacement measuring, mixing and dispensing equipment must be used. Equipment shall be capable of conditioning components stored in independent tanks and consistently measure as per prescribed mix ratio, mix and dispense liquid to be poured on prepared surface manually or mechanically. Equipment shall have capability to monitor proportions of two components as per manufacturer and will be capable of mechanincally ditributing reflective media evenly across width of markings. Static mixing and impingement are acceptable methods of mixing. Mil thickness and bead application rate shall be accoding to applicable specifications.

Do not dilute with any solvent or thinner
Apply when surface and ambient conditions are 35°F and rising for proper cure