POLYCHEM

POLYCHEM® 7060-V-60 is an acrylic-vinyl toluene modified alkyd combining the fast dry properties of VT alkyds with improved durability. It is a high-performance coating ideal for machinery enamel, implements, and aerosols.

POLYCHEM 7610-OX-50 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

POLYCHEM® 7563-V-60 is a vinyl toluene copolymer designed for use in primers, enamels, aerosols, and sanding sealers where lacquer type dry is required. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP). It's applications lie in areas like equipment enamels and floor seals.

POLYCHEM 7577-KD-65 is a VT modified Linseed oil in a narrow cut aliphatic hydrocarbon, providing a flash point of greater than 100 F, but at the same time allowing for faster dry than standard mineral spirits cuts.

POLYCHEM® 7482-PMA-90 is a solid, short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP). Its applications lie in numerous fields, like metal product finishes, baked enamels with melamine, and farm implements or equipment.

POLYCHEM® 7605-K-80 is a short oil soya based chain stopped alkyd cut to 80% in methyl propyl ketone. It is useful in air dry, force drying, or baking enamels and is designed to have flexibility and adhesion. It dries in heavy films comparable to conventional solids that are short to medium alkyd.

Polychem OP-94-1 is a vinyl toluene modified alkyd.

POLYCHEM® 7531-V-55 is a medium soya / IPA alkyd with water extendibility to 30% NV. It has applications in numerous areas, like general utility enamels, architectural enamels, and also in aerosols.

POLYCHEM® 7655-KD-75 is a high solids VT oil reduced in narrow cut mineral spirits. It has applications in fields like primers, aerosols and also in enamels - lacquer type dry and copolymer.

Polychem 7667-OX-50 is a medium soya alkyd cut in Oxsol 100. This product is low VOC.

POLYCHEM® 7686-BA-65 is a high solid, fast drying short oil chain-stopped alkyd that can be formulated for fast dry durable finishes and bake applications. It provides excellent durability and adhesion, along with good corrosion protection. It also exhibits excellent indirect impact and flexibility for baking applications.

POLYCHEM® 7689-V-60 is a fast drying acrylic modified alkyd. It has excellent durability and can be used in aerosol applications and fast drying enamel. It has applications in fast dry enamels and in aerosols.

Polychem 7774-EB-85 is a HAP’s free high solid, chain-stopped water reducible alkyd. It has excellent flow and leveling properties and has designed for low VOC baking enamels (below 150 g/l). It can provide excellent hardness, adhesion and gloss along with good corrosion protection.

POLYCHEM® 7775-EB-70 is a HAP's free water reducible chain-stopped alkyd. 7775 exhibits excellent corrosion resistance and QUV retention. In addition, it provides good early water resistance. It is ideal for industrial finishes, including air dry and force dry applications, fast dry enamels, and primer applications.

POLYCHEM® 7776-PP-75 is a HAPs-free high solids, fast drying water-reducible alkyd reasin. It is ideal for industrial and high gloss DTM applications. It has excellent corrosion resistance and gloss retention, along with great adhesion. It has applications in industrial top coats, primer applications, and industrial maintenance applications. It also has excellent features like excellent gloss, fast drying, and being EB free.

POLYCHEM® G801-238-X-66 is a glyptal short oil non-drying alkyd. It has excellent compatibility and adequate hardness. It also has very high color retention and good flexibility. It is specifically designed for baking enamels and serves as an effective plasticizer for nitrocellulose lacquers.

POLYCHEM® G7758-MS16-60 is a general purpose air drying enamel vehicle with maximum resistance to yellowing from aging and exposure to kitchen fumes. It is versatile and suitable for high-quality interior or exterior architectural gloss and trim enamels, as well as for industrial finishes like machinery enamels, freight paints, and marine paints.

POLYCHEM® OP-98 is a co-polymer resin that is designed for fast dry finishes with excellent water and alkali resistance. It is tailored for multiple applications, including metal furniture, floor sealers, and aerosols, offering versatile solutions for various surface coating needs.

POLYCHEM G2505 is a long oil Soya alkyd. It is a general-purpose gloss air dry enamel with excellent resistance to yellowing on aging and exposure to kitchen fumes.

POLYCHEM® 2390-M-80 is a high solids long soya alkyd with good compatibility and adhesion. Can be used as a blending resin to achieve a lower VOC. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP). It is effective as both a VOC modifier and a grinding vehicle.

POLYCHEM 7779‐MS16‐60 is a soybean oil-modified uralkyd that exhibits fast drying, high gloss, and water, mar, and abrasion resistance. Mineral spirit 16 is used as the solvent for this product. This product is commonly used for clear and pigmented floor finishes, maintenance primers, and enamels.

POLYCHEM 7778-M-70 is a long oil soya alkyd that is designed to meet the TTR-266 Type I, Class A specification. It is a low-HAPs resin that can be formulated into a HAPs-free coating. Mineral spirit is used as the solvent for this product.

POLYCHEM® 4773-BA-70 is a short oil coconut alkyd with very low color (200 APHA color). It can be formulated for use in a low VOC baking vehicle in combination with aminoplast resins or as a plasticizer for nitrocellulose lacquers. It has excellent durability and gloss retention compared to conventional resin.

POLYCHEM® 7639-TBA-60 is a TOFA alkyd with chain-stopping properties and is optimized for fast-drying, durable finishes. Utilizing a t-butyl acetate version of 6868, it's tailored for very low VOC formulations. Its applications encompass air-dry or baked enamels, offering versatility in creating high-quality coatings.

POLYCHEM® 5101-BA-75 is a high solid short linseed tung oil phenolic modified oxidizing alkyd that offers lift resistance and is very fast dry. It is well-suited for primer applications and industrial enamels, providing reliable performance in a variety of coating processes.

POLYCHEM® 7780-X-50 is a short-oil TOFA alkyd formulated for air dry and low bake or foce dry industrial finishes. It is ideal for fast air dry or force dry industrial enamel applications, as well as for primer and shop coats, ensuring efficient and durable coating solutions.

POLYCHEM® 2001-B-55 is a medium soybean, stopped chain alkyd resin designed to be used in paint formulations for drums, construction, carpentry, and vehicles in general, as well as industrial primers and heavy agricultural machinery. It is formulated for traffic enamels and industrial coatings, providing reliable performance and durability in diverse applications.

POLYCHEM® 5200-M-80 is a long oil urethane-modified alkyd resin with moderate viscosity and low hazardous air pollutants (HAP) content, allowing for HAP-free coatings (below 1% HAP). Tailored for marine paints, wood, and parquet varnishes, it ensures fast drying, high gloss, hardness, and excellent weather resistance.

POLYCHEM® 2002-BA-65 stands as a medium-soybean, stopped-chain alkyd resin, offering a non-volatile matter of 65%. Tailored for paint formulations, it finds its place in various applications such as drums, carpentry, traffic and general vehicle coatings, industrial primers, and heavy agricultural machinery coatings. An additional benefit lies in its HAP-free formulation, ensuring environmental compliance.

POLYCHEM® 5100-X-60 is a short linseed tung oil phenolic modified oxidizing alkyd that offers lift resistance and fast drying. It is designed for primer applications and industrial enamels, ensuring high-quality coatings for various surfaces and industries.

POLYCHEM® G2507-OMS-70 is a general purpose gloss air-drying enamel vehicle with excellent resistance to yellowing with aging. This resin is designed for use in enamels where low V.O.C. is required. It is used for high-quality exterior gloss and trim enamels. It is also used in many industrial finishes, like freight and marine plants.

POLYCHEM® 2000-V-50 is a medium alkyd resin designed specifically for applications where fast drying is important. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP). It is versatile, serving as an excellent choice for traffic paint, farm and implement enamels, as well as general metal primers and topcoats, catering to a wide range of coating needs.

POLYCHEM® 7517-M-75 is a high solids medium oil alkyd for use in air dry or forced dry systems. Brush enamels or primers with VOC levels of 340–400 grams/liter can be formulated. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).