Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
Very Good Processing Properties
High Rigidity
Excellent Mechanical properties
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Recommended Applications
- General purpose containers up to 20 L
- Lubricant oil containers (up to 15 L)
- Edible Oil containers (up to 15 L)
- Bottles for food, milk packaging
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Melt Flow Index ( 190°C & 2.16 kg) 0.35 g/10 min ASTM D1238 Density (23°C) 0.962 g/cm³ ASTM D1505 Tensile Strength at Yield (50mm / min) 32 MPa ASTM D638 Elongation at Break (50mm / min) min. 500 % ASTM D638 Notched Izod Impact Strength (at 23°C) 350 J/m ASTM D256A Flexural Modulus 1300 MPa ASTM D790A Hardness 68 Shore D ASTM D2240 Vicat Softening Point (10N) 129 °C ASTM D1525 Heat Deflection Temperature (0.455 Mpa) 80 °C ASTM D648
Regulatory & Compliance
- Certifications & Compliance
- Regulatory Requirements
HDPE Blow Molding grade B6003 shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall als°Comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.
Safety & Health
- Health and Safety Information
The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised t°Consult the MSDS for the product under consideration for use.
Storage & Handling
- Storage & Handling
Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 °C. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance.