Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Description
- Two-part, flowable, red RTV silicone
- 100:0.5 Mix Ratio (Base: Curing Agent)
Applications & Uses
- Markets
- Applications
- Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- Use a sealing, caulking, adhesive or potting material in electronic and space applications where high vacuum environments are encountered
- For applications requiring a broader operating temperature range
- Instructions for Use
Mixing
Thoroughly mix 0.5% by weight of curing agent to base. Use of a pipette is recommended for dispensing small amounts of the curing agent. Caution: The curing agent may cause skin irritation. In case of eye contact, irrigate with water immediately and seek medical attention.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of the material being deaerated. Hold vacuum until bulk deaeration is complete.
Note: Some bonding applications may require the use of a primer. NuSil Technology SP-120 silicone primer is recommended.
Properties
- Appearance
- Red
- Typical Properties
Value Units Test Method / Conditions Viscosity 45,000 (45,000 ) cP (Mpa*s) - Lap Shear 650 (4.48 ) psi (MPa) - Durometer Type A 50.0 - - Elongat ion 160.0 % - Mix Rat io 40:00.5 - - Specific Gravity 1.45 - - Tensile 900 (6.21 ) psi (MPa) - Work Time 3.0 hours - - Cured Properties
Value Units Test Method / Conditions Cure System Alkoxy - - Cure at RTV 7.0 days -
Packaging & Availability
- Country Availability
- Regional Availability