Products

Nizhnekamskneftekhim ABS Plastic 0475Е is a grade with high impact strength applied for sheet extrusion. It is a good-processed grade with enhanced heat resistance intended for production of sheet extrusion (coextruded or not) for sanitary appliances and transport components. It is produced self-colored only, free of additives and dye.

Nizhnekamskneftekhim High-Impact Polystyrene 945Е is an high impact polystyrene is produced by bulk block copolymerization of styrene and butadiene rubber. High impact polystyrene for extrusion molding of articles. May be used for short-cycle molding with preservation of impact strength. It is used for manufacture of structural foams and such articles as home appliances casings, toys, and articles with high gloss.

Nizhnekamskneftekhim ABS Plastic 2332 is an easy flow, molding grade with a good heat resistance during the process. It is used for production of household appliances, particularly, for complicated parts closed to heat source (front panel, washing machine frame). It is used for production of electrical goods as well. This grade is produced self-colored only, additives/dye free.

Nizhnekamskneftekhim High-Impact Polystyrene 740M is an high impact polystyrene is intended for injection molding and extrusion applications. The polymer is used for fast cycle injection molding of parts for household and electronic appliances.

Nizhnekamskneftekhim High-Impact Polystyrene 740 is a general purpose molding grade with high melt flow rate, intended for manufacture of parts for small and big household and electronic appliances.

Nizhnekamskneftekhim High-Impact Polystyrene 825EM is an high impact polystyrene is intended for injection molding and extrusion applications. The polymer is used for fast cycle injection molding of parts for household and electronic appliances.

Nizhnekamskneftekhim ABS Plastic 0445Е is an extruded grade of general purpose with a good rigidity-hardness balance. It is used for production of sheets with high quality surface (co-extruded or not and with high extrusion ratio), applicable for refrigerators, sanitary, packaging, automobile parts, consumer goods and furniture (profiles). It is produced self-colored only, free of additives and dye.

Nizhnekamskneftekhim High-Impact Polystyrene 825 is an high impact polystyrene produced by mass block copolymerization of styrene and butadiene rubber. The polymer is used for production of articles by extrusion.

Nizhnekamskneftekhim ABS Plastic 0646 is an easy flow, molding, heat-resistant grade with impact strength and temperature resistance during the process. It is an indigenous due to low yellow index and color resistance. It can be used mainly for production automobile internals, (extruded profile, interior finish and etc.) and with corresponding coating for external parts such as grids and looking-glasses. It is produced self-colored only, additives/ dye free.

Nizhnekamskneftekhim ABS Plastic 1035 is an easy flow, molding, heat-resistant grade with impact strength and temperature resistance during the process. It is an indigenous due to low yellow index and color resistance.It can be used mainly for production automobile internals, (extruded profile, interior finish and etc.) and with corresponding coating for external parts such as grids and looking-glasses. It is produced self-colored only, additives/ dye free.

Nizhnekamskneftekhim High-Impact Polystyrene 825ЕS is high impact polystyrene is intended for injection molding and extrusion applications. The polymer is used for fast cycle injection molding of parts for household and electronic appliances.

Nizhnekamskneftekhim High-Impact Polystyrene 825М is an high impact polystyrene is produced by bulk block copolymerization of styrene and butadiene rubber. It is used for manufacture of industrial packaging by thermoforming and for extrusion molding of multilayer profile sheets. It is used for thin wall extrusion.

Nizhnekamskneftekhim High-Impact Polystyrene 825Е is an high impact polystyrene is produced by bulk block copolymerization of styrene and butadiene rubber. It is used for manufacture of industrial packaging by thermoforming and for extrusion molding of multilayer profile sheets. It is used for thin wall extrusion.

Nizhnekamskneftekhim ABS Plastic 3432 is an easy flow, general purpose, injection molding grade with a good impact resistance and high gloss. It is used for production of small and large-sized consumer products such as; vacuum-cleaner, toys, telecommunications. It is produced self-colored only, additives/dye free.

Nizhnekamskneftekhim High-Impact Polystyrene 825ЕSМ is an high impact polystyrene designed for extrusion and thermal molding articles. Product is intended for industrial packaging by thermal molding and for multilayer profile sheets by extrusion technique. Product is used for a thinlayer extrusion.

Nizhnekamskneftekhim ABS Plastic 1534 is an easy flow, molding grade, with a medium heat resistance and impact strength, enhanced heat resistance during the process. It is an indigenous due to low yellow index and color resistance. It can be used mainly for production automobile internals. It is produced self-colored only, additives/ dye free.