Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Benefits
Good dimensional stability & High heat resistance.
Applications & Uses
- Markets
- Applications
- Composites End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
Electrical/Electronics ,Housing Appliance , Industrial ,Medical & health care application such as Telecommunication hardware ,sunroom ,carports,car & truck washes, LCD,sliding doors , window, lab Instrument etc.
- Processing Guide
Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, it is recommended for hot air drying at 120 °C for 2 to 4 Hrs- Post Molding Recommendations
has a high thermal stability starting to soften at 145 Deg.c and become a melt at 230 Deg.c will decompose above 320 Deg.c. No damage upto 145 Deg.c but if it melts into a solid mass temperature above this,it then has only scrap value.
Properties
- Color
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Strength 62.0 MPa ASTM D-638 Tensile Modulus 2300.0 MPa ASTM D-638 Elongation at Break min. 70 % ASTM D-638 Flexural Strength 92.0 MPa ASTM D-790 Flexural Modulus 2300.0 MPa ASTM D-790 Izod Notched Impact Strength(23°C) 65.0 Kj/m2 ASTM D-256 A Izod Notched Impact Strength(-30°C) 12.0 KJ/m2 ASTM D-256 Rockwell Hardness 120.0 R Scale ASTM D-785 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (18.5Kg/Sq Cm Load) 125.0 °C ASTM D-648 Heat Deflection Temperature (4.5Kg/Sq Cm Load) 136.0 °C ASTM D-648 Melting Point 140.0 °C ASTM D-2117 Flammability UL 94(Thickness 0.8mm) V2 - ISO1210/UL-94 CLTE (23°C - 80°C,flow) 0.2 W/m-°C ISO 11359-2 Thermal Conductivity 7.0e-05 1/°C ASTM C 177 - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 30.0 V/Mil ASTMD-149 Relative Permittivity (60 Hz) 3.0 Volts UL-746A,PLC Code-0 Volume Restivity 1.0e+15 Sec. UL-746A, PLC Code-3 Surface Restivity 1.0e+15 Gm/10min. ASTMD-1238 - Other Properties
Value Units Test Method / Conditions Specific Gravity 1.2 - ASTM D-792 Water Absorption(Saturation. immersed) 0.35 % ASTM D-570 Water Absorption (23°C , 24 Hrs) 0.3 % ASTM D-570 - Injection Molding
Value Units Test Method / Conditions Feed Zone 270 - 280 °C - Compression Zone 280 - 290 °C - Mixing Zone 290 - 300 °C - Mould Temperatures 80 - 110 °C - - Rheological Properties
Value Units Test Method / Conditions MFR (300°C/1.20 Kgs) 15.0 Gm/10min. - Mold Shrinkage(Parallel) 0.5 % ASTMD-955 Mold Shrinkage(Normal) 0.5 % ASTMD-955
Regulatory & Compliance
- Certifications & Compliance
- Regulations compliance
Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC