Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Backing Material Type
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
NECAL 9170 will adhere to many substrates including aluminum, brass, steel, glass, enamels, and plastics such as polystyrene, ABS, and acrylic.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Uses
- Because of its thickness NECAL 9170 is recommended for use on rough surfaces.
- Bonding Instructions
Remove the release liner and apply to a clean, dry substrate. Use firm pressure to obtain maximum contact. Increasing application force will optimize bond strength to surface. The adhesive will reach maximum bond after 72 hours.
Properties
- Physical Properties
Value Units Test Method / Conditions Total Thickness (Without Liner) 2.0 mils - 180° Peel from Stainless Steel (Both Passes, 16 hour Dwell,PSTC-101, 2 mil PET Backing) min. 3 lbs. - Shear Adhesion (Both Passes, 1 inch x 1 inch x 227g, 72°F, 2 mil PET Backing) min. 7 days - Application Temperature Range (2 mil PET Backing) 50.0 °F - Service Temperature Range (2 mil PET Backing) -20.0 °F - Short Term Temperature Range (Minutes/Hours) 400.0 °F - Long Term Temperature Range (Minutes/Hours) 300.0 °F - Loop Tack from Stainless Steel (PSTC-16) min. 3 lbs. -
Packaging & Availability
- Release Liner Availability
- Available with P, W, H, J, HD, VF, P1, HD-2 or W1 liners
Storage & Handling
- Storage Data
The shelf life of this material is at least two years when stored at 72°F and 50% relative humidity. Increased temperatures and/or humidity will affect performance characteristics.