Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Characterstics
- Elektrisch leitfähig
- Good slide properties
- For use in explosion hazard areas
- Extremely high conductivity
- Voltage dissipation on the surface in less than 0.1s
- Reduction in drive power with no reduction in performance
- Saves up to 50% energy $$ Minimal and constant sliding friction coefficient even in continuous operation
- Self-lubricating $$ Approved for use in the food industry (EU and/or FDA)
- Capabilities
As a solid sliding base in the semi-conductor industry For modular chain and conveyor belts Guides for PET bottle conveyors As workpiece carriers for sensitive electronic components Guides and slide elements for machine construction
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
Properties
- Mechanical Properties
Value Units Test Method / Conditions Average Coefficient of Friction against POM⁶ (0.25 m/s, 0.25 N/mm²) approx. 0.18 μ - Average Coefficient of Friction against Steel⁶ (0.25 m/s, 0.25 N/mm²) approx. 0.1 μ - Breaking Elongation min. 220 % DIN EN ISO 5272 Charpy Impact Strength (Two-sided Notch) min. 120 kJ/m² DIN EN ISO 179 Coefficient of Elasticity (Tensile Test) min. 700 MPa DIN EN ISO 5272 Hardness 60 - 63 Shore D DIN EN ISO 868 Indentation Hardness min. 25 MPa DIN EN ISO 2039 Sand-Slurry Test 80 % DIN EN ISO 15527 Yield Stress approx. 20 MPa DIN EN ISO 5272 - Typical Properties
Value Units Test Method / Conditions Code PE - UHMW - ISO 10431 Average Molecular Weight 9 x 10⁶ g/mol - Density max. 0.94 kg/dm³ DIN EN ISO 11831 Material Colour Black - - Sheet Group 1.1 - DIN EN ISO 15527 Water Absorption (Saturation at 23°C) max. 0.01 % - - Thermal Properties
Value Units Test Method / Conditions Burning behavior UL 94 (Sample thickness 3/6mm) HB/HB - - Heat Conductivity (23°C) 0.4 W/(K x m) DIN 52612 Linear Thermal Coefficient of Expansion α (Average Value between 23 and 60°C) 20 x 10⁻⁵ m/(K x m) DIN EN ISO 113592 Lower Service Temperature⁴ -200 °C - Melting Temperature 130 - 135 °C DIN EN ISO 3146 Upper Service Temperature Constant in Air (5000h)³ 80 °C - Upper Service Temperature Short-term (Air)² 90 °C - - Electrical Properties
Value Units Test Method / Conditions Specific Surface Resistance max. 10⁶ Ω IEC 60093 Specific Contact Resistance max. 10⁻⁶ Ω x cm IEC 60093
Regulatory & Compliance
- Certifications & Compliance