Products

CoatOSil™ MP 200 silane promotes adhesion in a broad range of applications via multiple epoxy and silane groups on each oligomer chain. Its gamma-gylcidoxy propyl epoxide ring reacts with many organic groups while its alkoxy silane groups promote adhesion to inorganic substrates. Condensation of its silanol groups can also provide crosslinks between polymer chains.

CoatOSil™ T-Cure Silane Oligomer may be useful in the development of coating formulations where reactivity with a mercapto silane is desired. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primers for metals and flooring, and aurospace and automotive refinishing applications.

CoatOSil™ 3501 coatings additive is the Momentive Performance Materials most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives. And this additive isn’t one-dimensional; it also functions as an extremely effective defoamer, especially in aqueous systems. And it enhances slip and mar resistance in waterborne, water-reducible and conventional and high-solids solvent systems.

Momentive's CoatOSil™™ 7030 Addressing Critical Coating Properties additives portfolio provides a broad range of products to address a large range of performance needs in the coatings industry. CoatOSil™ additives can improve coating processability and help enhance surface appearance. Momentive tailors the structure of each CoatOSil™ additive molecule and produces a variety of grades with differing utility in water or solvent borne coating application, whether the most critical properties are related to foam control, anti blocking, wetting, slip or flow and leveling.

CoatOSil™ 2812 Coatings additive is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solvent systems. Applications include waterborne coatings, solventborne coatings and solventless or high-solids coatings.

CoatOSil™ DRI waterborne silicone resin can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its chemical structure enables CoatOSil™ DRI waterborne silicone resin to overcome the difficulties of combining silicone materials with organic waterborne resins. CoatOSil™ DRI waterborne silicone resin has been shown to improve hydrophobicity and elongation properties when used as a co-binder with acrylic latexes, resulting in more flexible coatings and sealants. CoatOSil™ DRI waterborne silicone resin can also be considered as a sole binder when maximum thermal and UV stability is a priority. When applied alone, CoatOSil™ DRI waterborne silicone resin cures at room temperature to form an elastomeric film.

Enhancing the physical properties of water-borne dispersion polymers, such as polyurethane and acrylic latexes, CoatOSil™ 2287 silane enables the formulation of coatings with good shelf stability, improved wet adhesion and enhanced resistance to water and organic solvents. This non-yellowing additive can be considered as an adhesion promoter or crosslinker.

CoatOSil™ 3573 coatings additive can provide a high level of slip and mar resistance in water-borne coatings. In addition to promoting excellent slip properties in water borne formulations, CoatOSil™ 3573 coatings additive can aid in defoaming in solvent-borne coating formulations.

The CoatOSil™ 2816, 2817, 2818 and 2819 coating additives series offers varying degrees of slip performance benefits. To date, coatings for wood, leather goods, industrial and auto refinishing, as well as overprint varnishes and inks, have benefited from the excellent slip and mar resistance features of the CoatOSil™ serieswhen incorporating the appropriate grade. This broad-ranging set of applications demonstrates the compatibility of this series with solvent-borne, water-borne, and UV/EB cured systems, and itsbalanced silicone/polyether chemistry is the root of this application flexibility.

CoatOSil™ 3505 coatings additive is an excellent candidate for coating formulations that require an array of benefits. Its silicone portion can provide enhancements that include: defoaming, slip; mar resistance, plus, flow and leveling. Comprised of a silicone backbone and an all polypropylene oxide (PO) polyether chain. The degree of property enhancement will be directly related to the interaction of all components of the formulation and the additive use-level.

CoatOSil™ 1770 silane can benefit from better adhesion, improved appearance, and longer retention of functional and esthetic properties. As a cycloaliphatic epoxy silane, CoatOSil™ 1770 silane can deliver crosslinking in latex under room or elevated temperature cure conditions. Through crosslinking, CoatOSil™ 1770 silane can improve the solvent, stain and weather resistance of the final coating.

CoatOSil™ 7001 copolymer is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. When CoatOSil™ 7001 copolymer is incorporated as a flow and leveling additive, the appearance and distinctness of image (DOI) of the clearcoat is typically excellent, compared to current commercial additives used in the fomulations discussed.

CoatOSil™ 77 coatings additive. It generally promotes a uniform finish and its air-release capacity can help to minimize defect formation. In addition, it can enable formulations to generate exceptionally low surface tensions - even when used in low dosages.

CoatOSil™ 7500 copolymer is a silicone-polyether block copolymer that can help provide excellent flow and leveling in a variety of solvent borne and coil coating applications. It is an excellent candidate for coil coatings such as pre-painted metal applications.

CoatOSil™ P576 Medium-hard high solid phenylmethyl silicone resin in solvent. Binder for anticorrosion coatings with thermal stability up to 600°C. The main potential fi elds of application are the coating of machine components, engine manifolds, car exhaust silencers, drying units etc. These applications commonly use one-coat fi nishes. Systems of this kind may also be utilized in the sealing of spray-metallized surfaces.

CoatOSil™ 7608 trisiloxane coatings additive into water-borne coatings and inks can help with smooth and efficient spreading, even on hard-to-wet surfaces . CoatOSil™ 7608 coatings can help generate low surface tension, even when used in low dosages, as well as promote a glossy finish and reduce surface defects in the cured coating.

CoatOSil™ 7605 coatings additive has been shown to provide these same performance enhancements to powder coating formulations. Unlike most others in the CoatOSil™ line of additives, it is the waxy solid nature of CoatOSil™ 7605 coatings additive that can allow it be incorporated into powder coating formulations.

CoatOSil™ 7602 coatings additive is a silicone copolymer with a polyethylene-oxide (EO) pendant side chain. The silicone portion of the molecule can help provide benefits such as good mar resistance and antiblock capabilities. The EO component enables ide compatibility with water-borne coatings and inks. This chemical structure makes CoatOSil™ 7602 coatings additive an excellent candidate for water-borne coatings and inks requiring a low coefficient of friction (COF) for increased slip.

CoatOSil™ 7510 coatings additive is a silicone copolymer with a pendant structure and polypropylene oxide (PO) side chains. The all PO side chain helps minimize the potential for foam stabilization, making CoatOSil™ 7510 coatings additive an excellent candidate as a defoamer in water-borne industrial or decorative coating formulations.

CoatOSil™ 7604B coatings additive is a silicone copolymer with a pendant ethylene oxide side chain that can enable excellent wetting and recoatability in water-borne coatings and inks. For water-borne primers and other industrial coatings, CoatOSil™ 7604B coatings additive is a good candidate where wetting and recoatability are a principal requirement.

CoatOSil™ 1211C coatings additive helps enable wetting of waterborne systems on common and hard-to-wet substrates. The product's nonfoaming characteristics and superwetting properties make it an excellent candidate to consider for coatings applied by spray or high-speed roll methods. CoatOSil™ 1211C coatings additive applications may include coatings for plastic films and components, wood and glass coatings. May improve results on less than optimal prepared surfaces.

CoatOSil™ 7600 coatings additive is a silicone polyether copolymer with a pendant structure. It has been incorporated as a wetting agent or co-emulsifier in industrial and decorative water-based coatings.

CoatOSil™ DSA 6 friction modifier is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing silicone lubricity, CoatOSil™ DSA 6 friction modifier has a lower specific gravity than conventional inorganic fine powders and typically has superior heat and chemical resistance as compared with conventional organic fine powders.

CoatOSil™ Resin P501 Medium-hard phenylmethyl silicone resin in solvent Binder for anticorrosion coatings with thermal stability up to 600°C. The main potential fi elds of application for coatings utilizing CoatOSil™ Resin P 501 are the coating of machine components, fi re doors, engine manifolds, car exhaust silencers, drying units etc.

CoatOSil™ DSA 10 is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing the specific characteristics of silicones, such as lubricity and water repellency, CoatOSil™ DSA 10 silicone micro resin has a lower specific gravity than conventional inorganic fine powders and typically has superior heat and chemical resistance as compared with conventional organic fine powders.

CoatOSil™ P851 Phenylmethyl silicone resin in solvent.Binder for anticorrosion coatings, especially for primers with thermal stability up to 600°C. Due to the typically good application properties and long shelf life of the coatings formulated from it, CoatOSil™ Resin P 851 is an excellent candidate to consider for use in anticorrosion primers, particularly zinc dust primers. These anticorrosion primers are used in multi-coat systems for the protection of objects such as blast furnaces, cracking plants, steel stacks, rotary kilns etc.

CoatOSil™ 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss. This is possible because of its compatibility in formulated coatings. In addition, CoatOSil™ 3500 coatings additive is an exceptional general purpose flow and leveling agent and antimar additive for both waterborne and solventborne coatings.

CoatOSil™ FLX Coating Modifier for Silane/Polysiloxane containing coatings, including hybrids.Improves coating flexibility,gloss retention under harsh weathering conditions,corrosion performance in neutral salt spray testing Compatible with many organic resin systems and pigments Low viscosity, reactive diluent in coating formulation.

CoatOSil™ 7001E silicone-polyether block copolymer can enhance the appearance of solvent-borne coatings, especially two-component acrylic-polyol isocyanate cured coatings. The addition of CoatOSil™ 7001E copolymer can improve the final cured coating’s distinctness of image (DOI), film clarity and film coalescence, and can also readily accommodate recoating.

CoatOSil™ 2059 silicone emulsion is a solvent-free, fourmulated without APEO water-based emulsion of an amino functional siloxane formulated without alkylphenol ethoxylate (APEO).