TEDUR® R 9519

MOCOM Compounds TEDUR® R 9519 is a special injection molding grade containing 45% glass fibers and recycled material, making it suitable for applications such as fixing elements and lamp sockets. Pre-drying is required in a dry air (desiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. During processing, injection molding should be done with a melt temperature of 320-340°C and a mold temperature of at least 140°C.

Brand: TEDUR (44 products)

Polymer Name: Polyphenylene Sulfide (PPS)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 14000.0 - 14000.0 MPa

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Polyphenylene Sulfide (PPS)
Fillers Included: Glass Fiber
Polymer Name: Polyphenylene Sulfide (PPS)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Labeling Claims: Azo Colorants-free,
Azo Dyes-free,
Conflict minerals-free,
PAH-free,
PFOA-free,
PFOS-free,
Persistent Organic Pollutants (POP)-free,
Recycled
Materials Features: Chemical Resistant,
Good Flow,
High Temperature Resistance,
Low Thermal Expansion,
Wide Temperature Operating Range

Applications & Uses

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Parts & Components
Housings & Enclosures,
Terminal Blocks, Plugs & Sockets
Plastics & Elastomers End Uses: Fixtures,
Housings,
Lamp Sockets,
Sockets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties


	Value	Units	Test Method / Conditions
Flexural Modulus	14000.0	MPa	ISO 178
Flexural Strength	240.0	MPa	ISO 178
Tensile Modulus	16000.0	MPa	ISO 527
Flexural Deflection (Maximum Force)	1.8	%	ISO 178
Tensile Strength at Break	155.0	MPa	ISO 527
Tensile Elongation at Break	1.5	%	ISO 527
Impact Strength (Charpy, at 23°C)	35.0	kJ/m²	ISO 179/1eU

Physical Properties


	Value	Units	Test Method / Conditions
Density	1700.0	kg/m³	ISO 1183

Thermal Properties


	Value	Units	Test Method / Conditions
HDT / A (1.8 MPa)	270.0	°C	ISO 75-1/-2
DSC (Melt Point)	280.0	°C	ISO 11357

Electrical Properties


	Value	Units	Test Method / Conditions
Surface Resistance	1 x 10¹²	Ohm	DIN EN 62631-3-2

Flammability


	Value	Units	Test Method / Conditions
Flammability (0.75 m)	V - 0	class	UL 94
Flammability (1.5 mm)	V - 0	class	UL 94
Glow Wire (GWFI, 960°C, 2mm)	Passed	-	DIN EN 60695

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Mould Temperature	min. 140	°C	-
Melt Temperature	320 - 340	°C	-

Regulatory & Compliance

Certifications & Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS),
EC No.1907/2006,
IATF 16949,
ISO 13485,
ISO 14001,
ISO 17025,
ISO 45001,
ISO 50001,
ISO 9001,
REACH (Europe),
REACH (UK),
RoHS Compliant,
SVHC Compliant

Technical Details & Test Data

Pre-Drying Conditions

In a dry air (dessiccant) dryer 130-140 °C for 2-4 h
Dependant on moisture content

Storage & Handling

Storage Conditions: Store in dry, protected from light not above 30°C.