Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus 2450.0 MPa ISO 178 Flexural Strength 95.0 MPa ISO 178 Tensile Modulus 2500.0 MPa ISO 527 Tensile Stress at Yield 65.0 MPa ISO 527 Tensile Elongation at Yield 5.0 % ISO 527 Tensile Elongation at Break 30.0 % ISO 527 Impact Strength (Charpy, at 23°C) no break kJ/m² ISO 179/1eU Impact Strength (Charpy, at -40°C) 100.0 kJ/m² ISO 179/1eU Notched Impact Strength (Charpy, at 23°C) 15.0 kJ/m² ISO 179/1eA Notched Impact (Charpy, at -40°C) 7.0 kJ/m² ISO 179/1eA - Physical Properties
Value Units Test Method / Conditions Density 1130.0 kg/m³ ISO 1183 - Thermal Properties
Value Units Test Method / Conditions Vicat B50 220.0 °C ISO 306 HDT / A (1.8 MPa) 70.0 °C ISO 75-1/-2 DSC (Melt Point) 262.0 °C ISO 11357 - Typical Properties
Value Units Test Method / Conditions Moisture Content max. 0.15 % - - Processing Information (Injection Molding)
Value Units Test Method / Conditions Melt Temperature 270 - 290 °C - Mould Temperature 40 - 80 °C - - Rheological Properties
Value Units Test Method / Conditions Melt Index (MVR) 6.0 cm³/10min ISO 1133 MVR Temperature 275.0 °C - MVR Load 5.0 kg - Shrinkage (Lengthwise, 24h) 2.7 - 3.1 % ISO 294-4 Shrinkage (Lateral, 24h) 1.8 - 2.2 % ISO 294-4
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.